skippie
New Member
I know someone out there knows the answer, but before I buy them, I wanna be sure...do the 3.0L plug wires work on the 3.2L engines also? I would like to know, because they are about $40 cheaper, and Im wondering why.. eek!
Quick Question...
- Thread starter skippie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mr Anonymous
Tire Wall
The 3.2 coil pack is mounted at a steeper angle than the 3.0, so the wires for the 3.2 are a HAIR longer. The 3.0 wires will fit, but 1-2 of the wires might be stretched a little tight. If you leave those wires out of the plug wire holders on the valve covers, they fit just fine!
sdpatt
Sr. SHO Engr.
Yes, they can be made to fit just fine. Don't leave any slack in the rear bank wires and make sure there is no interference with the coolant lines under the throttle body. I ahve not had to leave them out of any of the wire looms. An added benefit is that the 3.0L wires have the cylinder number printed on them.
Similar threads
