Please HELP!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BMWNitro11

New Member
Joined
Mar 4, 2003
Messages
32
Reaction score
0
Location
Minnesota
I just recently did 60k maitenence on my SHO. Now I am having problems. I was having missing and killing problems that come off and on. I couldn't figure it out so I brought it to a shop and they said it was the CPS so I paid $400 to fix it. Well it didn't fix it. So I ran the codes myself and the only thing I got was the Intake Air Sensor. And it seemed to be temp related (doesn't act up when cold outside. So I changed that.... still didn't fix it. Just ran the codes again now i get a 126 and 211. Please help I am sick of spending money and not fixing the problem!
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
If you are getting both the 211 and 214, I would look at the DIS module and its ground path. Are the two, 12mm bolts tightened on the crossover tube? Is the groun strap attached to the rear passenger side upper intake bracket bolt? Are the DIS connectors tightly attached.
 

BMWNitro11

New Member
Joined
Mar 4, 2003
Messages
32
Reaction score
0
Location
Minnesota
I checked the crossover tube bolt and one was loose. Would just one of the two bolts loose cause that? I haven't drove it to see if it works, but it's worth a try.
 

BMWNitro11

New Member
Joined
Mar 4, 2003
Messages
32
Reaction score
0
Location
Minnesota
Thank you very much. The crossover bolts where loose and that fixed it. So much for spending $400 at the shop. Just two damn bolts!!
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,142
Latest member
Kaevorlly

Members online

No members online now.
Back
Top