Need pulleys!!

[mclarida]

The bearing on my serpentine belt tensioner pully is going out. I need a new one. I would like to replace the other two ideler pulleys as well at the same time. Any suggestions are welcome-93 atx-Emerald-
Mike

 

[AREA 91]

Here's your answer.

www.shonutperformance.com

The bearings are listed under the 60K section.

Parts Common to both ATX and MTX
V6 ATX or MTX NSK Bearing for 4 and 6 rib tensioner pullies (requires installation) (yes, this is the right one, correct width etc) BD20-15DWA 40.06

 

[mclarida]

Thanks-M

 

[SHOtimer]

Here's your answer.

www.shonutperformance.com

The bearings are listed under the 60K section.

Parts Common to both ATX and MTX
V6 ATX or MTX NSK Bearing for 4 and 6 rib tensioner pullies (requires installation) (yes, this is the right one, correct width etc) BD20-15DWA 40.06

I would make sure before you order it that it is the correct pulley. Those might be for the timing belt idler pullies.

Doug