SHO_DOODmorrris
Owner & Fanatic
Hey guys,
Went through the garage today and shit myself as to how much stuff I have accumulated over the last year from the junkyard/my car/my parts car. I simply don’t have the room anymore so almost all of it HAS TO GO.
If you don’t like the price feel free to shoot me an offer.
PRICES ARE IN USD AND DO NOT INCLUDE SHIPPING.
MAF’s
80mm Maf $25 each (ONE SOLD TWO LEFT)
Stock Mafs $5 each BOTH SOLD
In the first pic we have 2 (have 3 now found another one) 80mm MAF Sensors out of Lincoln continentals. The black plastic one is out of a 2000 and the cast aluminum one is out of a 1996. Both are OBD2 sensors so the harness needs to be modified (easy). 25 Bucks a piece first with money sent gets choice (not that is matters they are both the same)
Also in the pic are two stock MAF sensors that both worked when removed. 5 bucks each
Computers, Controllers, Sensors, Modules etc…
B9B1 Computer $20
ABS Controller $5
DIS Module $15 One sold one left
M code Relay Module $15 SOLD
Airbag Sensors (both) $5
Keyless entry Module (with code sticker) $5 SOLD
Remote control module $5
B9B1 is out of my 89 from when I put the x2j in for my tweecer and works 100%. ABS controller is out of my old 91+ parts car and didn’t throw an abs code or light so I assume its fine. DIS module tested and works 100%, one of the connectors is missing a chunk of plastic but the connector still plugs in and stays in no problem. Relay module works have too many spares : p
Shit ton of EATC’s
Lincoln EATC $15 each or $20 for both Both SOLD
1989 specific EATC $25 each or $35 for both
Soft buttons:
Damn near mint condition teal (92-95) $35
Broken buttons (one is green 89-91 other is teal 92-95) $15 each (good donors for the Lincolns to convert them)
Hard button out of a crown Vic $25 (just needs to be repined to work I think)
The Lincolns are the 2 up top and are a neat mod if you know how to do some electrical, there is a how to somewhere on the forum to make them work but I forget where. The 89 specific EATCs are the 2 on the hard left. Third from the left is a damn near mint condition Teal soft button with hairline cracks on the defrost and A/C buttons barely visible. The next one is green display out of a gen 1 with cracked buttons. Next is a teal display out of a gen 2 with cracked buttons. And the last one is a HB out of a Crown Vic
1989 Canadian Cluster
$15
Working 1989 specific Canadian cluster, pulled it from my 89 when I did a dash swap.
Grills
Home made Police grills $25each SILVER SOLD
Stock grills $15 each Electric currant red SOLD
Police grills I did myself, they are a little crude but look decent with a black paintjob. The bottom one is electric currant red in decent shape and the second from the bottom is currant red with some pretty bad stone chips.
Electric Currant Red Plus spoiler
$125 SOLD
This was off of my 91+ parts car and I was going to put it on mine but I need some more money for my turbo build and its taking up room in my garage. No cracks decent condition, some scratches sun faded a little. All mounts are 100% come with nuts on them. All it needs is a little paint if you choose and to be installed!
Misc Parts
Plain center caps $10 SOLD
Hood struts $10 SOLD
Cup holder/coin tray $5 SOLD
K&N panel air filter $15 SOLD
3.0l Injectors $20 Have 2 sets now!
Rear caliper rebuild kit $20
Shift boot from a cable shifted 89 $5 SOLD
Hood struts both works I guess one was replaced before got hem off my 91 parts car. K&N panel filter out of my 89, don’t need it any more cause I’m turboing. 3.0l injectors have 200 000 KM on them and worked before the engine was torn out. Caliper rebuild kit was leftover from a brake job never needed it because I got new calipers.
Also have an 89 steering wheel that i packaged up for mad celt a LONG ass time ago and forgot about. if you still want it its here for you! if not somone else can take it for whatever you think its worth. SOLD
Phew. That’s all for now folks. Feel free to make me an offer on a combination of things.
-Mitch
Went through the garage today and shit myself as to how much stuff I have accumulated over the last year from the junkyard/my car/my parts car. I simply don’t have the room anymore so almost all of it HAS TO GO.
If you don’t like the price feel free to shoot me an offer.
PRICES ARE IN USD AND DO NOT INCLUDE SHIPPING.
MAF’s
80mm Maf $25 each (ONE SOLD TWO LEFT)
Stock Mafs $5 each BOTH SOLD
In the first pic we have 2 (have 3 now found another one) 80mm MAF Sensors out of Lincoln continentals. The black plastic one is out of a 2000 and the cast aluminum one is out of a 1996. Both are OBD2 sensors so the harness needs to be modified (easy). 25 Bucks a piece first with money sent gets choice (not that is matters they are both the same)
Also in the pic are two stock MAF sensors that both worked when removed. 5 bucks each
Computers, Controllers, Sensors, Modules etc…
B9B1 Computer $20
ABS Controller $5
DIS Module $15 One sold one left
M code Relay Module $15 SOLD
Airbag Sensors (both) $5
Keyless entry Module (with code sticker) $5 SOLD
Remote control module $5
B9B1 is out of my 89 from when I put the x2j in for my tweecer and works 100%. ABS controller is out of my old 91+ parts car and didn’t throw an abs code or light so I assume its fine. DIS module tested and works 100%, one of the connectors is missing a chunk of plastic but the connector still plugs in and stays in no problem. Relay module works have too many spares : p
Shit ton of EATC’s
Lincoln EATC $15 each or $20 for both Both SOLD
1989 specific EATC $25 each or $35 for both
Soft buttons:
Damn near mint condition teal (92-95) $35
Broken buttons (one is green 89-91 other is teal 92-95) $15 each (good donors for the Lincolns to convert them)
Hard button out of a crown Vic $25 (just needs to be repined to work I think)
The Lincolns are the 2 up top and are a neat mod if you know how to do some electrical, there is a how to somewhere on the forum to make them work but I forget where. The 89 specific EATCs are the 2 on the hard left. Third from the left is a damn near mint condition Teal soft button with hairline cracks on the defrost and A/C buttons barely visible. The next one is green display out of a gen 1 with cracked buttons. Next is a teal display out of a gen 2 with cracked buttons. And the last one is a HB out of a Crown Vic
1989 Canadian Cluster
$15
Working 1989 specific Canadian cluster, pulled it from my 89 when I did a dash swap.
Grills
Home made Police grills $25each SILVER SOLD
Stock grills $15 each Electric currant red SOLD
Police grills I did myself, they are a little crude but look decent with a black paintjob. The bottom one is electric currant red in decent shape and the second from the bottom is currant red with some pretty bad stone chips.
Electric Currant Red Plus spoiler
$125 SOLD
This was off of my 91+ parts car and I was going to put it on mine but I need some more money for my turbo build and its taking up room in my garage. No cracks decent condition, some scratches sun faded a little. All mounts are 100% come with nuts on them. All it needs is a little paint if you choose and to be installed!
Misc Parts
Plain center caps $10 SOLD
Hood struts $10 SOLD
Cup holder/coin tray $5 SOLD
K&N panel air filter $15 SOLD
3.0l Injectors $20 Have 2 sets now!
Rear caliper rebuild kit $20
Shift boot from a cable shifted 89 $5 SOLD
Hood struts both works I guess one was replaced before got hem off my 91 parts car. K&N panel filter out of my 89, don’t need it any more cause I’m turboing. 3.0l injectors have 200 000 KM on them and worked before the engine was torn out. Caliper rebuild kit was leftover from a brake job never needed it because I got new calipers.
Also have an 89 steering wheel that i packaged up for mad celt a LONG ass time ago and forgot about. if you still want it its here for you! if not somone else can take it for whatever you think its worth. SOLD
Phew. That’s all for now folks. Feel free to make me an offer on a combination of things.
-Mitch
Last edited:
