Jordan's Rebuild Plan of action
- Thread starter Jordan_R
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Jordan_R
Stock Block Ready To Knock...er..Rock
So turns out I'm missing the secondary or cam timing chain tensioners and they will be in Tuesday but otherwise I'm waiting on intake manifold until Wednesday. So tentative plans to be running next week...
In the mean time.. is this considered copyright infringement @bpd1151?? Jkjk it's just primer
In the mean time.. is this considered copyright infringement @bpd1151?? Jkjk it's just primer
Ecoboost_xsport
SHO Member
Think I just ****** in my pants a little...
Intake manifold gonna get the same treatment?
Jordan_R
Stock Block Ready To Knock...er..Rock
Intake manifold is going to get the same matte black I believe! Hot pipes still orange so it'll be a nice contrast back and forth.
Ecoboost_xsport
SHO Member
I'm almost thinking if it was orange....sittin in between those black valve covers....might be nice...
Jordan_R
Stock Block Ready To Knock...er..Rock
Will have to see if it's too much between the hot pipes and what not! Might be a cool idea. Guess I can always repaint some of the piping.
Looks badass!! I love it
Jeff2017
SHO Member
- Joined
- Jan 29, 2017
- Messages
- 810
- Reaction score
- 516
Looks good! I would never remember what parts go where. You must have a photographic memory.
Jordan_R
Stock Block Ready To Knock...er..Rock
had to ask @Ecoboost_xsport yesterday a completely obvious question... So no LOL it's a guessing game at this point!
Ecoboost_xsport
SHO Member
I usually can't remember every little detail myself, especially if there is any length of time involved between teardown and install.
One of the reasons why I take so many pics...great for reference. Makes me realize how much more difficult all this probably was back in the days before the advent of digital photography being in the hands of the average person.
Pics along with paper/sharpie/and zip lock bags are a life saver.
Ecoboost_xsport
SHO Member
And don't forget totes...lotsa plastics totes, lol. I had an entire Harley in totes, ziplocks and dividers on a dedicated shelf when I did my frame-up restoration, lol.
Jordan_R
Stock Block Ready To Knock...er..Rock
I used a mixture of ten magnetic trays and plastic bags
Ecoboost_xsport
SHO Member
You may find yourself having to pull those out and installing it on the rail...
He mentioned doing what he did above when I was asking him questions installing mine, I believe this is how he installed his OEM injectors back when he had to replace them all.
At this point, must be the clips slip over the top, connect the wire harnesses....pop on the rail? I would think connecting the harness might be hard at this point but it must be it’s not too bad.
Ecoboost_xsport
SHO Member
Ah, more than one way to skin that cat, I see. I had tried that method first, but it didn't work for me. The wire harness turned into the issue. But I may not have worked through it all the way. Gave up and went the other route.
