johnny boy
New Member
I removed my intake and when i did this.. the rubber connectors fell apart i guess from age thay were britel,can some one tell me where i can get them and about how much do thay cost.
Thanks
Thanks
Intake ?????
- Thread starter johnny boy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SHOnuff93
SHO Member
around $100 for a set of silicone hoses from the SHO shop.
Slo-Sho
It wasn't me!
If you mean the rubber connectors that connect the runners.....you're SOL. They no longer make them.
www.bakerprecision.com
You should need one foot of 1.75 @ 15.99 and one foot of 2.25 @ 19.99. The silicone hose is about a 16th small ID then advertised. So the 2.25 will work on the end tank and the piece near the throttle body. 1.75 is perfect for the intake runners since they measure a 16th small than 1.75.
If you want the 2.125 call and they will have it.
You should need one foot of 1.75 @ 15.99 and one foot of 2.25 @ 19.99. The silicone hose is about a 16th small ID then advertised. So the 2.25 will work on the end tank and the piece near the throttle body. 1.75 is perfect for the intake runners since they measure a 16th small than 1.75.
If you want the 2.125 call and they will have it.
Similar threads
