Intake removal

[SHOsFAST]

I was wondering if anyone knows what size sockets and tools are needed to remove the Intake manifold. I checked through my manual but there is no mention of intake removal... Hope this is the right place for this.

Thanks

Graham

 

[sdpatt]

Send me a PM and I'll send you my Valve Gapping Procedure that includes the detailed information that you request.

 

[Racer X]

long needle nose pliers help for some of the hidden hose clmaps at the throttle body, a flat head screwdriver for the smaller coolant lines (again, at the throttle body), and 10mm (12 bolts) and 12mm (1 or 2 bolts) sockets for the intake itself.

It's no lightweight, so be ready to lift something heavy off of the motor.

 

[john buck]

you need a 10mm and 12 mm socket, ratchet and extensions, some pliers to remove the clamps on the throttle body hoses....

 

[gtstang1967]

there is a write on it on www.shotimes.com
that covers removal and installation when removing the intake is a good time to do a tb bypass but thats optional.

 

[sho_sc]

and don't forget the 8mm for the throttle and cruise cable.

 

[SHOsFAST]

Thanks a lot for the info guys! I am going to begin to pull it off in a few minutes... again thanks to all.