Horse power

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

stephen newberg

SHO Member
Joined
Jan 15, 2001
Messages
3,370
Reaction score
398
Location
Ladysmith, BC, Canada
Back forever ago after all my mods were done mine dynoed at 204.7 hp at the rear wheels. Of course, that was almost 20 years ago. I doubt it makes that much these days.

pax, smn
 

GEN 3 SHO FAN

SHO Member
Joined
Jan 31, 2015
Messages
823
Reaction score
275
Location
Canada
We also not forget that hp calculation changed around 2004-2005.

Cars produced before these years have more power (a bit) than listed if we take consideration with the new calcul.

I was aware of this but it's only this week when I was watching a video on which used sports cars are the best buy on youtube that I learned more on this. The guy spoke about the Mustang Cobra "Terminator" of 2002-2003 and was speaking about the specs of this car and said it was first rated at 385 hp but with the new formula, it was now at 405 hp...

The ratio is a 5,52% bonus hp. If the same ratio can be used, then a new 1996 SHO can have 248 hp stock !
*(237 hp for the 97 to 99 years)
 

stephen newberg

SHO Member
Joined
Jan 15, 2001
Messages
3,370
Reaction score
398
Location
Ladysmith, BC, Canada
I was looking forever to find a rwd SHO :p

Ops. My error. I guess I am so old I just regularly think 'rear wheels'. :) It was a front wheel measure on the dyno, rather obviously.

Which brings up an interesting question, as I have never taken the 911 C4S to the dyno: how do they measure an all wheel drive vehicle that alters its power to the wheels dynamically? Does anyone know?

pax, smn
 

gamefanatic

SHO Member
Joined
Feb 20, 2005
Messages
790
Reaction score
288
Location
Barstow, CA
Ops. My error. I guess I am so old I just regularly think 'rear wheels'. :) It was a front wheel measure on the dyno, rather obviously.

Which brings up an interesting question, as I have never taken the 911 C4S to the dyno: how do they measure an all wheel drive vehicle that alters its power to the wheels dynamically? Does anyone know?

pax, smn

Depends on the Dyno. Some can only measure one axel. Some cars have issues when using a dyno if they have all wheel drive, even if the dyno supports it and have to disconnect the rear.
 

stephen newberg

SHO Member
Joined
Jan 15, 2001
Messages
3,370
Reaction score
398
Location
Ladysmith, BC, Canada
Interesting. Thank you. I have only had two AWD coupes, a '91 Talon TSI (really a Mits Eclipse) and now the '10 911 C4S and I have never actually taken either to be dynoed as I did not modify either. I have just assumed the numbers from the manufacturer are at least pretty close. IIRC the Talon was claimed to have 200 hp and the 911 in the form mine has says 408. Quite a difference between the two in the almost 20 years between them, considering they have about the same curb weight.

pax, smn
 

gamefanatic

SHO Member
Joined
Feb 20, 2005
Messages
790
Reaction score
288
Location
Barstow, CA
Also makes a difference as to how old and/or the way it measures. Dynojet, Dynapack, & Mustang are ones I know of, but think there has recently been another one released. If you do dyno your vehicles, do them on the same type. Different types will have different values based on how they measure. Some smog shops use a dyno to simulate real world emissions.
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,142
Latest member
Kaevorlly

Members online

No members online now.
Back
Top