help finding tss plug???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ThatShoGuy

SHO Member
Joined
May 1, 2007
Messages
1,153
Reaction score
15
Location
michigan
well i think i figured out my trans issue ther is no plug ,pluged into the tss sensor... were does this plug come from i cant seem to find it..

i did just put this motor in so i guess it could be anywhere???:oogle:
 

Mr Anonymous

Tire Wall
Joined
Apr 24, 2002
Messages
7,317
Reaction score
1,947
Location
St. Louis, MO
It's on the same harness as the downstream O2's, P/S and VAPS connectors. It should loop under the tranny dipstick tube and across the tranny to the TSS.
 

ThatShoGuy

SHO Member
Joined
May 1, 2007
Messages
1,153
Reaction score
15
Location
michigan
It's on the same harness as the downstream O2's, P/S and VAPS connectors. It should loop under the tranny dipstick tube and across the tranny to the TSS.

well i found my plug it was melted to the exhaust manifold.. no damage really....

trans shifts great now....

now i got on the wire loom

2 o2s
1 gray plug that go's to the rack
1 black plug that go's to the tss
now there is one more black plug on that loom looks just like the one on the rack.. were does that last black plug go??

:thankyou::thankyou: again
 

venom

Rowboat Design
Joined
Feb 9, 2003
Messages
444
Reaction score
42
Location
Toledo, OH
That goes on the rack as well

well i found my plug it was melted to the exhaust manifold.. no damage really....

trans shifts great now....

now i got on the wire loom

2 o2s
1 gray plug that go's to the rack
1 black plug that go's to the tss
now there is one more black plug on that loom looks just like the one on the rack.. were does that last black plug go??

:thankyou::thankyou: again

The two pin flat rectangular plugs both go onto the rack, one is the pressure switch so the PCM knows when you are demanding power steering so it can increase the idle to keep the car running, and the other is for the variable assist that our cars have. The two are just a few inches apart.
 

ThatShoGuy

SHO Member
Joined
May 1, 2007
Messages
1,153
Reaction score
15
Location
michigan
The two pin flat rectangular plugs both go onto the rack, one is the pressure switch so the PCM knows when you are demanding power steering so it can increase the idle to keep the car running, and the other is for the variable assist that our cars have. The two are just a few inches apart.

wow i cant find the one that takes the black plug guess im gonna have to look harder 2morrow
 

Mr Anonymous

Tire Wall
Joined
Apr 24, 2002
Messages
7,317
Reaction score
1,947
Location
St. Louis, MO
Look on the rack, there is a silver cube about 1"x1", and the connector is pointing at the ground.
 

Forum statistics

Threads
107,077
Messages
1,181,199
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top