headlight questions

[rcsavage]

just making sure what im thinking of buying is all going to go together correctly and not fry instantly.

ok so will these bulbs be ok:http://cgi.ebay.com/ebaymotors/NEW-...ewItemQQcategoryZ33710QQitemZ8012533867QQrdZ1

will the headlight wire haness from here be ok:http://suvlights.com/

what else would i need, if anything?

what confuses me about the harness is that there are two pictures that look alike but the second one i dont understand. basically, which harness do i get for those bulbs.
http://suvlights.com/wireharness.jpg
or
http://suvlights.com/90059006wireharness.jpg

 

[SolidState]

the first one.

The first one is for the 9007, which I am assuming you have a 92-95 Gen2. The second one is for a 9005 or 9006, which isn't applicable to any taurii. I believe the Gen1s use a 9004...which will use the same harness, but wired a little differently...

 

[khanartist]

9005 & 9006 setups are for the dual GM type hi-low beam setup. Not even close to our SHOs. SHOs run the dual filament hi-low, one bulb. 9007 is what you need.

IMO SilverStars aren't that wonderful, but this is a topic of much debate.

 

[rcsavage]

ok sorry. i have read around about lights and assumed the gen I and gen II bulbs were the same. my mistake. I have a gen I. so i need a 9004 bulb? if it is 9004, what harness is it. when I order the harness will it ask me what type i need? sorry, its my first time upgrading the headlights.

 

[SolidState]

according to that site, the 9004 is a similar connector, but is wired up a little bit differently...

are you looking at teh standard harness, or the HD 9004/9007 harness?

 

[rcsavage]

im looking at the "universal wire harness". the $55 one. but will that work with (im assuming 9004 fits in gen I) 9004 bulbs. i know it says "9004/HB1" but im just making sure.

heres what i think i need. http://img.photobucket.com/albums/v407/rcsaavgeboy/headlight1.jpg is that correct?