In a recent accleration contest *not a race*, I found out my car was not making full boost. Only .5 bar in low boost, and .6 in high boost. I looked online to see what I could find out about my Profec A boost controller, but did not find what I needed. So I just started pushing buttons, and found out how to get the controller to 'relearn' the boost curve, since some changes have been made to the car lately. After the relearn, was seeing .6 bar in low boost, and .7 in high. Still not what I should be seeing (set at .7 low and .9 high). Set the boost level up to .8 low and 1.0 high, and saw a full .8 in high mode. If I took 4th higher I may have seen a little more boost, but at least this was telling me some good things. After I get my intake side of the turbo all rerouted with the new pipe and filter, I will reset the Profec again and see what she does. Thanks Tony, for whipping my butt, or else I may have not looked into this for a while. 