Exhaust

[SVOFANATIC]

As many know I need an exhaust on my car no more carbon footprint because no more worn rings but the loudness is a bit annoying.

I just want to know if this would work with the 91 manual trans?

http://www.summitracing.com/parts/WLK-17399/Application/?query=Engine+Size|3.0L/182

 

[lowc]

rod shifter or cable?

 

[St Louis SHO]

Yes, as long as its for the 3.0l manual, it will work.

 

[SVOFANATIC]

Cable. it isn't a 3.0 it's a 3.2 lol

 

[St Louis SHO]

Umm, THE EXHAUST HAS TO BE FOR A 3.0L!

 

[SVOFANATIC]

how so? my 3.0 exhaust fits on the 3.2 whats the difference?

 

[St Louis SHO]

3.2l is an ATX, therefore the y-pipe is different, plus it has no rod shifter to clear.

 

[kevinspann]

http://www.summitracing.com/parts/WLK-17400/

 

[SVOFANATIC]

Guys don't you remember I blew a hole in my 3.0? I now have a 3.2 mtx with the mods to make it work and kevin thanks for the link.

 

[St Louis SHO]

Guys don't you remember I blew a hole in my 3.0? I now have a 3.2 mtx with the mods to make it work and kevin thanks for the link.

What dont you get? YOU HAVE TO USE THE 3.0 STUFF STILL...

 

[SVOFANATIC]

That's what I'm saying lol I thought you were saying the 3.0 stuff wouldn't work on the 3.2 sorry my bad.

 

[SeanMc]

Dense.

 

[LOUDSHO92]

This will work better and last longer: SHO Source Catback

 

[94SHO_Norfolk]

I replaced the stock mufflers with a set of these (or something similar, can't remember exactly the position of the inlet/outlet), and reused the stock exhaust tips:

http://www.summitracing.com/parts/WLK-17656/

Sounds decent, all-welded design, less than half the price of a comparable Flowmaster.

 

[SHOtime2511]

That Dynomax kit sucks.
Build your own exhaust or buy the SHOsource one.

 

[AREA 91]

As many know I need an exhaust on my car no more carbon footprint because no more worn rings but the loudness is a bit annoying.

I just want to know if this would work with the 91 manual trans?

http://www.summitracing.com/parts/WLK-17399/Application/?query=Engine+Size|3.0L/182

Yes, it will work.
I have tried to get the Dynomax people to change there listings in the catalog for the past few years. I tried again at this year's SEMA show.
There is a good chance that Dynomax will stop making the kits for the SHO, and that's a bummer!
:wave:

 

[Racer X]

That Dynomax kit sucks.
Build your own exhaust or buy the SHOsource one.

This. I got tired of mine rusting to pieces and installed a used Borla system. Failing that, the SHOSource kit is probably the best way to go.

 

[Art5]

I have Borla on my car now, but did have Dynomax before. Wasn't bad with cats though, a little loud on start but nice after warm up. Borla is way better, but don't know how good it will be after I take cats out. We'll see this summer.

 

[SHOtime2511]

yep,Borla systems are nice also.

 

[SVOFANATIC]

I just dont' have an exhaust system and I'm just looking to replace my crappy non existant one I have now with out buying stock stuff.