electrical problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mattsho1993

SHO owner
Joined
Aug 19, 2009
Messages
342
Reaction score
25
Location
albion, new york
ok So randomly not all the time when i put the turn signal on to turn left my eatc goes off or blinks? when lights are off turn signals work besides the corner lights.... when lights are on they still dont work but the right turn signal is a solid green arrow never shuts off.... Is it my multi function switch going crazy on me or????
 

SHO1

Coke Is It!
Joined
Dec 31, 2005
Messages
1,275
Reaction score
214
Location
The State Of Hockey
Not sure, that's why I couldn't say it's almost def the MFS. Not sure if it happens much on Gen 2, but the Hd. Lt./blinker/Dr. Lt./dash problems is a fairly common thing to '89 and I think maybe '90 and/or '91. somewhere around then they started putting a relay in the circuit. Those problems were normaly the MFS. The EATC Lts. would be tied in with the other dash Lts., are they cutting out too? Could be related to Hd. Lt. switch, dimmer switch, auto lamps, any of the related relays, etc.
 

mattsho1993

SHO owner
Joined
Aug 19, 2009
Messages
342
Reaction score
25
Location
albion, new york
driver door light doesn't work gonna check light bulb also driver side back light in ceiling doesn't work either... but pass does?
 

mattsho1993

SHO owner
Joined
Aug 19, 2009
Messages
342
Reaction score
25
Location
albion, new york
So i take off the fender, header panel and bumper cover, start through the wires find several broken wires. The orange bulb in the headlights ground was cut the ground on the fog light was broken and a plug at the bottom of the washer or coolant jug was smashed... So i fixed them all and cut the plug off problem solved so far... My moonroof was also leaking right above the switch, so i read a old post about there beeing holes or tubes on each side sprayed penetrator in them and dug around with thin long screw driver hopefully that'll be good to lol Anyone elso got a good solution or similar problem they fixed.... And anyone have a damn shift **** for my ATX wtf... lol and i forgot how to edit my sig?
 
Back
Top