Electric fuel pump replacement

[greg geraci]

If any one is familiar wth replacing the fuel pump..... I just replaced mine and I didn't notice at first but I had a wire with a push on connector along side of the wire loom for the assending unit that plugs into the top of the fuel tank.
For the life of me I can't find any where to plug it into. It only is about 6" long and in the surrounding areas there is no terminal for it. All I can think of is it is extra?.......... Any one know?
thanks
greg

 

[NotSoSlowSHO]

Extra

 

[TYSHO]

If it's an "L" shaped end with a rubber boot, it plugs in right beside [to the passenger side] the big connector on that little stud that is threaded.


Edit: Make sure you didn't break that stud when removing the connector, maybe that's why you can't find anything.

 

[greg geraci]

I may of broke it off which is why I'm getting a funny reading on my gauge. What next?
Is it a ground?

 

[greg geraci]

Does it plug into the wire loom connector or off to the side
Thanks

 

[greg geraci]

hey ken,
Are you famiiar with that extra wire, I can't seem to find a place for it to plug into . Some one else said that I broke off the connector where it plugs onto but no way did I screw up the Main loom connector or any where near that.
greg

 

[TYSHO]

Give me your email and I will go outside and take a picture and show you the wiring, there's no extra wiring around there unless someone tapped in some wires.

 

[greg geraci]

Pics for gas tank.

[email protected]
Thanks for taking the time with the Pic and all. I don't think I broke any thing off. I looked real good and didn't see any thing tht resembled where I could of plugged it in to. But it sure would help if you could send me the pic

Greg Geraci :wave:

 

[TYSHO]

What year is your SHO? I just took a look at my 93 and it does not have what I mentioned, I think this is the Gen 1 set up. Also, my 93 didn't have that wire coming out the harness like the 89. I'll send pics shortly, after I upload them!

 

[TYSHO]

Pics sent...

I just did a search and came up with you having an 89 SHO. Seems like someone swapped tanks on your SHO with the fuel pump mounting plate [gen2 style], or just the plate alone, therefor you have no where to put the connection.

Let us know!