EATC lighting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SHOinNC

New Member
Joined
Feb 26, 2003
Messages
39
Reaction score
0
Location
North Carolina
Have a 95 sho with the eatc. This question should be an easy one.Does the hot /cold symbols and the outside temp button on the panel light up? all the other buttons light up.just noticed it tonight. If it needs a bulb,how hard to replace?
Thanks Richard
 

nc89sho

S13 Sellout
Joined
Feb 27, 2002
Messages
1,357
Reaction score
77
Location
Clemmons NC
yes they are supposed to light up. probably a bulb. not too hard if you don't mind removeing the dash panel and the eatc.
 

SHOinNC

New Member
Joined
Feb 26, 2003
Messages
39
Reaction score
0
Location
North Carolina
I'm from the thriving metropolis of Fuquay-Varina
about 15 miles south of Raleigh. I see your from Clemmons, I use to work with a guy from there.He lives in Tobaccoville now. Nice area,I like that part of the state. Later, Richard
 

SHOtimer

#2910
Joined
Sep 8, 2002
Messages
4,081
Reaction score
396
Location
Santa Clarita, Ca
I just finished dealing with the same problem with the exact same buttons. Good luck finding a bulb, I got luck and found a very generous forum member that gave me one. No dealer will have one...but they will have a new EATC..$200+~. Removal and installation of the bulb is rather easy if you have anymore questions just post em.
Doug
 
Back
Top