Driver's seat question...

[[email protected]]

Hey guys...I'm noticing lately that, when braking, the driver's seat rocks a bit forward, and then pops back when I come to a stop.

Getting out and checking it, there's a noticable rocker-motion in the seath, like something is loose. I tightened down the bolts where it mounts to the floor, but those apparently aren't it.

Anyone have any other suggestions?

Also, I've got three little plastic shrouds that I keep finding, apparently falling off my driver's seat (underneath and what not)...

Anyone have this same problem? I have no clue where these things go.

------------------
1993 Ultra Red ATX
http://sho.kythri.net

 

[ArrestMeRedSHO]

I have the same rocking problem as well if you find outwhat it is let me know.

 

[fredhurderjr]

Ditto on my 91. I've had other issues with the car suspension-wise to worry about first, but will check into it one of these fine days.

 

[94shoboy]

i thought only chevy's did this. pull the seat out and turn it over, the spring that pulls the locking lever in place might have gotten too streched out or the teeth might have rounded over.

 

[smokesho]

could also be a loose bolt or two somewhere.... i think your gonna have to pull the seat and re install it. to really check it out.

 

[sdpatt]

There is a small amount of clearance in the seat tracks to allow the seat to move forward and backward. There has to be a little room to ket the seat move. Over time, these clearances get a little larger. Nothing broken, just not perfect.


------------------
Scott

1991, 254K miles, glass hood, police grill, SVO shifter, Catz fogs,
K&N, 73mm MAF, Superchip, PP Y-pipe, Borla cat-back, 190 lph pump
Eibach/Tokico/polyurethane, SHO Shop front & rear strut braces,
16x7.5" Moda R1, 225/55ZR16 Bridgestone RE730, -1 deg camber x 4,
6 disc CD, Class II hitch, Silver award at SHOklahoma Car Show