Doors problem

[E.Buzz]

My doors are a little rusty, and everybody advises me to replace them. Will doors from a second gen Taurus fit on my '89? Also, if they do, what do I have to do to them to get my "SHO" door trim onto the standard Taurus ones? I'm guessing just to take off the door panel and look for some screws, but I could be wrong. :jpshakeh:

 

[v-tec killer]

My doors are a little rusty, and everybody advises me to replace them. Will doors from a second gen Taurus fit on my '89? Also, if they do, what do I have to do to them to get my "SHO" door trim onto the standard Taurus ones? I'm guessing just to take off the door panel and look for some screws, but I could be wrong. :jpshakeh:

You do not have to remove the door panels to remove the door cladding, the nuts are on the inside lip of the door. Take those nuts off and pull carefully along the top, it will unsnap. It is fairly easy...

 

[E.Buzz]

Cool, but I still don't know whether the doors themselves will fit.

 

[Racer X]

Cool, but I still don't know whether the doors themselves will fit.

They'll fit.