Custom Made Stainless Brakelines

[SHO Continental]

To go along with my 11.6" front brakes which will be installed this friday I also had some braided steel hoses made. At this hard to find shop.. original 11.6 brake thread

Anyone in the socal area that needs hoses of any kind.. these guys can custom make any hose.

handed them a stock '94-95 line, and '94-06 caliper so they could make the lines.

they can go on either side

also picked up my '96 SHO pads (part # 598C at autozone)

 

[wood_e]

Why not buy the earl's lines for $90? How much were those?

 

[SHO Continental]

I wanted to have them before friday when I install my 11.6 upgrade..

 

[SolidState]

just out of curiosity, what did you pay for them?

finding earl's up here in canuckville is tricky...

 

[SHO Continental]

$60 for both lines with banjo bolts and crush washers

 

[SASHO91]

or why not these?? http://store.summitracing.com/partd...331+4294907826+4294924761&Nao=50&autoview=sku
(or are they the same thing?)

 

[SASHO91]

ok nevermind.. 60 bucks...

wow!!!!
i think im going to head to Cali.. to get some brake lines....

 

[DHMag]

$60 for 2 custom lines or $90 for a set (4) from Summit or Jegs.

i believe Jegs is now offering 2 day shipping now.

 

[SinisterSHO]

Last I knew, Earl's were only available as a set of four. 90 for a set of four, or 60 for a set of two. Hm.

Dang Dale.

 

[SHO Continental]

I'd say I could get some for whoever wants them, but they'd end up at $80 or $85 with shipping so it probably isn't worth it.

 

[SASHO91]

I though it was for all 4...
excuse me for having dial up....

 

[DHMag]

I'd say I could get some for whoever wants them, but they'd end up at $80 or $85 with shipping so it probably isn't worth it.

it wasnt my intention to knock you down. i can fully understand where youre coming from. you needed/wanted them but didnt have time to wait. sometimes, it costs a little extra to get stuff sooner and/or locally.

 

[shojuan]

Can get bulk braided line and connectors and (carefully) make your own. I was going to do this a few years back but never got around to it. The advantages: You end up with enough extra line to replace your line every so often, reusing the same connectors. Total cost for materials was less too IIRC.

Those lines are pretty. That shop did a nice job putting them together neatly.

 

[SableSal]

Do those lines from Summit work on a 96-99 models?



Sal

 

[SHO Dude]

Nope. We're working on custom lines for the Gen III.

Anyone interested at $100? Choice of colors are clear (silver braid), red, blue or black.

 

[Mr Anonymous]

Nope. We're working on custom lines for the Gen III.

Anyone interested at $100? Choice of colors are clear (silver braid), red, blue or black.

Sure. Will there be enough extra slack in the fronts to accomodate PBR calipers?

 

[SHO Dude]

Sure.

As much as you'd like.
__________________
3.2L headgaskets in stock!

Doug Lewis
[email protected]
Ford Performance Specialists Inc.
Atlanta Georgia
770-949-7191
http://www.fordspecialists.com
2001 F-250 Powerstroke-
Garrett turbo - 700ft-lbs
1996 TR SHO-
Long tubes - bottle fed - low and fast
1989 CR SHO-
Shaftdrive supercharger - 400hp

 

[SolidState]

just out of curiosity, why are they not compatible? are the calipers for a Gen3 SHO different than Gen2?

 

[SHO Continental]

just out of curiosity, why are they not compatible? are the calipers for a Gen3 SHO different than Gen2?

Calipers are the same from '94-06 must be the fitting where the hose attaches to the hard line.

 

[Mr Anonymous]

Calipers are the same from '94-06 must be the fitting where the hose attaches to the hard line.

Precisely.

Doug, you should have an email in your box from me from this past weekend, just let me know on stainless lines too when you reply. Thanks!