Cruise control doesn't work, light does not come on

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Terrorizer

SHO or ****
Joined
Mar 31, 2010
Messages
277
Reaction score
7
Location
Arizona
The cruise control doesn't work on my car, it hasn't since I bought it. ITs a 1990 5 speed. When I turn cruise control on the light doesn't light up on the dash. (im assuming there is a light, lol). I checked the plastic clip that commonly breaks on the throttle but that is in tact. Anyone have any ideas?
 

jmpSHO2nd

SHO Member
Joined
Jul 21, 2010
Messages
645
Reaction score
147
Location
Massachusetts
The cruise control doesn't work on my car, it hasn't since I bought it. ITs a 1990 5 speed. When I turn cruise control on the light doesn't light up on the dash. (im assuming there is a light, lol). I checked the plastic clip that commonly breaks on the throttle but that is in tact. Anyone have any ideas?

I don't think there is a dash light for the cruise control, at least not for the Gen 2 SHOs.
 

beaudeen

BEAUDEEN
Joined
Jun 3, 2003
Messages
251
Reaction score
15
Location
Shannonville, Ontario
If your in a rust belt area, check the v-clamp that holds the 2 halves together on the vacuum can. Mine was rusted out and lost vacuum..just follow the cable down under front bumper drivers side.My 95 mtx doesn't have a cruise indicator light.
 

SHOred

New Member
Joined
Mar 28, 2008
Messages
84
Reaction score
6
Location
North Carolina
Do you have athird brake light? On some cars if it burns out the cruise will stop working. Also if you have a bad clockspring the cruise will quit. My cruise quit and when I replaced the clockspring it started working again.

SHOred
 

rubydist

SHO Master
Staff member
Super Moderators
Joined
Jun 25, 2007
Messages
7,521
Reaction score
3,399
Location
Denver
cruise will also not work if the vss is bad, or if the switches on the steering wheel are bad. you will need to follow the troubleshooting to get this taken care of, since there are so many possibilities.
 
Joined
Mar 30, 2010
Messages
144
Reaction score
0
Location
Kalamazoo, Michigan
my cruise stopped working for a while and It was simply where the throttle cable hooks onto something. so if you see a cable that looks detached, there you go!
 

Terrorizer

SHO or ****
Joined
Mar 31, 2010
Messages
277
Reaction score
7
Location
Arizona
my cruise stopped working for a while and It was simply where the throttle cable hooks onto something. so if you see a cable that looks detached, there you go!

You're probably talking about the black plastic clip that connects the cruise control thingy to the throttle cable. I'm pretty sure mine is attached, unless I'm looking at the wrong thing.
 

TopGunnYFZ

Active Member
Joined
Mar 9, 2007
Messages
550
Reaction score
105
Location
Livonia, MI
Nope thats it both cables run to the throttle body. My '90 always has a problem with it staying hooked so i just leave it off lol.
 

Terrorizer

SHO or ****
Joined
Mar 31, 2010
Messages
277
Reaction score
7
Location
Arizona
Do you have athird brake light? On some cars if it burns out the cruise will stop working. Also if you have a bad clockspring the cruise will quit. My cruise quit and when I replaced the clockspring it started working again.

SHOred

Yeah I have a third brake light, but it is working. What's the clock spring and how can I check it?
 

Terrorizer

SHO or ****
Joined
Mar 31, 2010
Messages
277
Reaction score
7
Location
Arizona
cruise will also not work if the vss is bad, or if the switches on the steering wheel are bad. you will need to follow the troubleshooting to get this taken care of, since there are so many possibilities.

I see. Do you know of a way to test the VSS and other various switches? Or have a possible link to testing info? I have a ford service manual but it doesn't show how to test sensors and electrical stuff. I think there is separate book for that kind of stuff.
 

rubydist

SHO Master
Staff member
Super Moderators
Joined
Jun 25, 2007
Messages
7,521
Reaction score
3,399
Location
Denver
if the vss is bad, you will get a pcm code, so check those.

the service manual has a troubleshooting section for the cruise, just follow that.
 

xshoel93x

SHO driver
Joined
Jan 25, 2010
Messages
118
Reaction score
4
Location
Massachusetts
ok i tested my cruise control. works but no light in dash which is weird cuz i thought i saw one before. oh well thats not the problem anyways
 

Latest posts

Forum statistics

Threads
107,094
Messages
1,181,344
Members
16,158
Latest member
ribeye2065

Members online

Back
Top