Could someone please tell me what sensor this is and where to get it.
- Thread starter ACV1081
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
rangerj
Active Member
Acv1081,
Looks like the oil sending unit available at auto parts stores. Wait for confirmation on this as i cannot tell from the picture exactly how the engine block is oriented. rangerj
Looks like the oil sending unit available at auto parts stores. Wait for confirmation on this as i cannot tell from the picture exactly how the engine block is oriented. rangerj
projectSHO89
SHOless In St L
Your photo doesn't give much detail, but if that is the block right below the #3 cylinder (cylinder closest to the brake reservoir/steering wheel), it is the oil pressure sending switch.
Have a different photo?
Steve
<small>[ January 22, 2003, 10:31 PM: Message edited by: projectSHO89 ]</small>
Have a different photo?
Steve
<small>[ January 22, 2003, 10:31 PM: Message edited by: projectSHO89 ]</small>
rangerj
Active Member
Acv1081,
Looks like the oil sending unit available at auto parts stores. Wait for confirmation on this as I cannot tell from the picture exactly how the engine block is oriented. rangerj
Looks like the oil sending unit available at auto parts stores. Wait for confirmation on this as I cannot tell from the picture exactly how the engine block is oriented. rangerj
Well it is right underneath where the head bolts to the block on the transmission end. Does that orientate you to where the pic is? I really want to know so I can order it asap. Thanks. Oh and it's 40 below with the windchill so I can't really go take a pic tonight, but I can tomm if we can't figure out for sure.
<small>[ January 22, 2003, 10:34 PM: Message edited by: ACV1081 ]</small>
<small>[ January 22, 2003, 10:34 PM: Message edited by: ACV1081 ]</small>
projectSHO89
SHOless In St L
Yep, what we said then...
V6 Oil pressure sender SW-1311 D4AZ-9278-A is under $10 at the Ford store, 4 bucks at AutoZone, 6 bucks at AAP.
Steve
V6 Oil pressure sender SW-1311 D4AZ-9278-A is under $10 at the Ford store, 4 bucks at AutoZone, 6 bucks at AAP.
Steve
Jr's Sho
New Member
You could always take it off, bring it to Autozone or something, and see what their oil pressure switch looks like looks like. Maybe the knock sensor if not the oil switch?
SolidState
No Mo SHO
I think the knock sensor is under the fuel rails between the heads....
smacd
New Member
If it were the knock sensor it would have more than one wire - I'm thinking it's the oil pressure switch as well.
Yamaha V6
SHO Enthusiast
Definitely the Oil Pressure Sender Adam, 26 or 27mm deep socket from memory, and from memory that D4 part number looks right.
Knock sensor's a piece of cake to get out... once you have the intake, and fuel rails & injectors & coolant tube & harness out of the way...
Knock sensor's a piece of cake to get out... once you have the intake, and fuel rails & injectors & coolant tube & harness out of the way...
Fred thanks for the verification and yeah who said the knock sensor was a PITA? I mean I've got easy access to everything since the intake, rails, heads, pistons, etc... are all off. Geez c'mon people quit cher ******** thumbs_u Pretty sad that I opted to do an engine swap instead of a 60K out of sheer laziness and lack of desire to be cramped
Yamaha V6:
Definitely the Oil Pressure Sender Adam, 26 or 27mm deep socket from memory, and from memory that D4 part number looks right.
Knock sensor's a piece of cake to get out... once you have the intake, and fuel rails & injectors & coolant tube & harness out of the way...
