Changing Keyless entry,how?

[sethsho]

How do I change it?
I recently purchased the car. The previous owner 'claims' to have forgotten it.
Not too long ago I remember reading a "how to" post, but can't recall where or when.
Any one, please help!

<small>[ March 09, 2002, 12:35 AM: Message edited by: sethsho ]</small>

 

[LarryK]

Entry Code

The system (permanent) entry code is located in four places:

- On the owner's warranty card.

- On a label on the inside of the luggage compartment door.

- On an owner's code card.

- On the electronic door lock control processor.

Door Lock Switch Actuator

To unlock the driver door, and disarm the anti-theft alarm control (19A366), if equipped:

- Enter the permanent factory code.

- Enter the owner's alternate code.

To unlock the passenger door(s):

- Press the 3/4 button within five seconds of unlocking the driver door or luggage compartment.

To unlock the luggage compartment:

- Press the 5/6 button within five seconds of unlocking the driver or passenger door(s).

To turn on the interior lamps and light all illuminated components:

- Lift either front door handle and press any button on the door lock switch actuator.

To lock all doors:

- Press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.)

This will turn off courtesy lamps.

To program a temporary code:

- Enter permanent code.

- Within five seconds of pressing last button of permanent code, press 1/2 button.

- Enter any alternate five digit code within five seconds of pressing 1/2 button.

 

[jymwhi]

I saw it posted on shotimes.com. For my SHO it was on a plastic card with the warrenty card. It was posted inside the glove box on a sticker and I had 2 extra stickers to post where ever I wanted. Perhaps there is some way that it would be available from FMC.

Good luck!

Jim White

 

[sethsho]

Thanks for the info.