Calling James

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kzoosho

Holset HX52
Joined
Dec 16, 2005
Messages
1,726
Reaction score
38
Location
grand rapids/kalamazoo
Hey i know James is going to get on and post his numbers so i will let him. Me personally i was very very disappointed with my numbers. Here are mine.
Also i didnt get tq read outs.
DSCF6142.jpg

DSCF6143.jpg

DSCF6144.jpg
 

1995mtxsho

SHO Member
Joined
Oct 26, 2004
Messages
786
Reaction score
44
Location
Grand Rapids, MI
Mine... 0 PSI... :nut:
Dyno1

And the disgraceful slips from the night before... Car 54 Where are you!?!?!?.... Answer: SLOW!

Run1

Run2

Run3

Run4

Run5

Run6

I could either get a good launch or hit 3rd... but not both... I think i should figure out whats up with my shifter...
 

Huntervf

Bored now
Joined
Jan 1, 2001
Messages
3,574
Reaction score
1,286
Location
Back in Michigan ... again.
I could tell which runs you missed third on :biggrin:

With a dyno pull of 200 horsepower to the wheels, a good launch and good shifts should have you easily hitting high 14s. My 89 with 194.1 FWHP ran 14.8 at 131 without finding the perfect combination of launch and shift (but getting pretty close). Either that or the dyno is reading high, cause 200 whp is HEALTHY :cool:

You have four main benchmarks to hit on the road to 14's:

2.2x 60 ft.
9.xx 1/8 mile time
70.xx 1/8 mile trap
92.xx 1/4 mile trap

Hit those marks or higher and you'll either be close to 14s or into them.
 

1995mtxsho

SHO Member
Joined
Oct 26, 2004
Messages
786
Reaction score
44
Location
Grand Rapids, MI
Is your shifter noisy by any chance?

Noisy?

The only noises it makes is the return spring creaks occasionally, and there is some slop in it. Feels like the ball and socket.

I have a good idea as to the cause of the problem just not exactly the effect.

When doing my clutch I let the linkages hang, I figure this to be the cause.

Either that or the dyno is reading high, cause 200 whp is HEALTHY :cool:

The Butt Dyno is not accurate, but I have Pulled on every SHO that has gotten next to me. So I believe the 200 pull.
 

SuperHO

Mental Patient
Joined
Sep 8, 2002
Messages
5,696
Reaction score
1,370
Location
St. Joe, MI
Huntervf said:
You have four main benchmarks to hit on the road to 14's:

2.2x 60 ft.
9.xx 1/8 mile time
70.xx 1/8 mile trap
92.xx 1/4 mile trap

Hit those marks or higher and you'll either be close to 14s or into them.

So let's see..in my 95 with the 3.0, I ran a 9.8@76 on my way to a [email protected] a 2.6 60ft time at what is now known as Knoll Gas.....whatcha think, Chris? Do I have a chance of hitting 14s?
 

Forum statistics

Threads
107,077
Messages
1,181,199
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top