No volume problem with GenII,JBL and CD. Have tried two radios, two CD's and 3 "tested good" amps. Volume controls register on radio display, and CD works but only very faint sound. Logic tells me no power to amp, but where do I look. Is there an aftermarket amp that will work, finding good used ones is iffy. Any help is appreciated. Dave
Audio Problem
- Thread starter cub1947
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I doubt there will be a plug-and-play aftermarket amp, but you can get a decent 4 channel that will step up your SQ. I'm not sure how the fusing works, maybe the amp and deck use separate fuses? I do believe if the amp wasn't getting power you would get no sound at all. Hope that helps. -Joe
NiNeTy Fo SHO
No-mo-SHO Man
I do believe IIRC that there is a thing that you plug into the back of the CD player...basically a jumper...that is used. Without this plug, the output is not amplied by the amps and thus very very quiet (aka, can barely hear when you turn up all the way). When you insert the special jumper, the amps kick in and works as normal.
This jumper is on the back of the CD player.
This jumper is on the back of the CD player.
