AAhhhhh! berrymans

[munkee]

My car was running fine until yesterday. I didn't replace the o-rings on the injectors when I pulled the motor because the parts store said they could only get them in a $300 gasket kit. I put some berrymans in the tank yesterday and all of the injectors now leak! I also found that napa sells o-rings for 3.49 per injector. Will berrymans hurt new o-rings too or just the old ones?

 

[SHOTIME]

Berrymans - Nectar of the gods.

Find someone with a used Upper gasket set and buy them.

I paid 20 bucks.

 

[jthomas68]

Josh has sold me a partial set before.I`d mail him and ask what he`s got.

 

[luigisho]

I think that you can find o-rings that connect at the fuel rail at many aftermarket places. The insulators at the head however, I believe only come with a complete upper gasket set (heads on up).

 

[munkee]

The guy at Napa had a listing for individual o-rings and the listing on the computer said "requires 2". I am hoping that when they come in tomorrow they will be what I need. If not (which I highly suspect) I will be looking for a set. So if anyone has a set for sale, please let me know.

 

[underdog1924]

I know 91SHOMTX has a parts car he's piecing out. I would talk to him.

 

[clintonk]

I ordered the NAPA injector o-rings, and they fit just fine, no leaks. There are four in a pack, that's why the listing says "requires 2".

Clinton Knight
'90 White 182K
'95 Green 49K

 

[Shoman94]

clintonk:
I ordered the NAPA injector o-rings, and they fit just fine, no leaks. There are four in a pack, that's why the listing says "requires 2".

Clinton Knight
'90 White 182K
'95 Green 49K

I just checked on SHONUT's site and he has the injector to head square o-ring listed. IF its the smaller round o-ring then its not listed seprately but I'm sure these o-rings could be matched up. I have a set here and I will see if I can match it up in my o-ring sanctuary.

 

[munkee]

The smaller o-ring at the top where the injector goes into the fuel rail was good. It was the insulator where the injector goes into the manifold that was dried out. Is there supposed to be another o-ring in there somewhere? I will know more tomorrow night, and thank you all for the help.