98 Serpentine belt tensioner.
- Thread starter IACshow76
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GEN 3 SHO FAN
SHO Member
You could have a bad pulley on one of your accessories. I remember that there are 2 different pulleys for the alternator. One is a little bit larger. Sadly, when they are replaced, part number refer to the alternator, not his pulley. The SHO alternator was shared with the Windstar which have a bit larger pulley IIRC. It could be also the pulley of your new pump maybe (but I don't know variants for this pump).
Also, check your tensionner if its moving freely. Mine was stuck in open position because they are at a very low level and lot of dirt entered in it. My mechenic spray a lot lubricant in it and make it move on and off many time until dirt came out. Dirt could makes your not opening correctly.
Also, check your tensionner if its moving freely. Mine was stuck in open position because they are at a very low level and lot of dirt entered in it. My mechenic spray a lot lubricant in it and make it move on and off many time until dirt came out. Dirt could makes your not opening correctly.
Similar threads
