'96 subframe bushing installation

[itwonder]

Is this installation correct on my '92, or should I have used the large washer from the recall kit? Using that washer would put the load on the raised perimeter of the bushing rather than in the center.

 

[SHOZ123]

Don't need the washer.

 

[itwonder]

Don't need the washer.

Thanks Paul. I thought so, but thought it prudent to check and be sure before I take the engine brace off.

 

[93rev2sev]

I used the washer.

When I approached 80 ft-lbs, the washer started collapsing. It finally collapsed the whole way and became quite concave before I was able to get to 100 ft lbs.

 

[SHOZ123]

57-75 lb-ft is the spec

 

[SHObill]

WOW ! That SF looks brand new!!