914-SHO Fuel line connectors

[3d914]

Anyone have a source for the fuel line connectors that mate with the lines from the front of the engine (see pic)?

I don't need the stock lines unless they have a different kind of fitting on the other end, since I'm connecting to a frame-mounted fuel pump.

Lines:

Fuel Pump & fittings:

 

[Phoenix]

If you plan on an aftermarket fuel regulator , thats easy (thats what im doing with the shogun) - remove the stock regulators (that will take care of those plugs you are stompted about) , and bolt in AN fittings and plumb everything in AN. You will need an adaptor from the rail to AN.


Note that if that fuel pump , pumps more then 155lph , the stock regulators wont cut it anyway. I got myself a Fuelab regulator - bulletproof yet quite cheap.

EDIT: if you need those connections anyway , I think rockauto has those kind of connectors - in the EXTRA stuff tab (you dont need to put your car in). If not , maybe in the regular stuff.

 

[3d914]

Thanks Phoenix, the fuel pump I'm using isn't high volume, so the stock pressure regulator will be used. Didn't have any luck at rockauto locating those connectors. Didn't see anything like them.

Any more details available?

 

[Phoenix]

On rockauto , go lets say : 94 - taurus - 3.2 - fuel/air - fuel line connectors.


Thats where I saw it. I just did and they are there.

 

[3d914]

Duh, got it. Must have clicked something wrong. Thanks.

 

[probe_racer]

those connectors are the same in 3.0s on fords including probe and the mustangs. i got my AN connectors to the fuel rails from summit racing.