1) take blinkers off
2) pry lense off .or break it
3) trace lense on paper or if you broke it trace the blinker housing on paper
4) buy some plexi or the shit you use over floresent lighting
if you use plexi you will need a heat gun there 25.00
................plexi
take and cut out the shape of the plexi and set it ontop of old lense before you break it off or if its taken off your ok ,
heat the plexi up over the lense ,push and mold it over the lense to make shape
.............lighting stuff
1) take old lense off and paint the housing whatever color you want , i used chrome paint
2) put clear silicone on the housing all the way around the outside where the lense hits
3) tape the lense to the housing and let dry
4) this step is optinal ,but if you dont want the cut lookin edges or you want it to look like aftermarket clear ,get either black pinstrip or electrical tape and tape the edges covering about 1/4 all the way around except the front what touches the headlight ,unless you wanna...
5) enjoy
you can use any kinda plastic if its thin its easier to mold like the lighting stuff , but the plexi i have that i made other out of is 0.95 kinda hard to mold 0.50 is easier...
email me
[email protected] if you have questions or want more pics
these pics really look like crap , ill post more later , looks better in person , last pic was with lights off just a reflection of the lights,,,
