gen 2

  1. T

    Looking for History on My New ’93 SHO (Carbon Hood/Trunk Car, VIN 1FALP54Y1PA142129)

    Hey everyone, I picked up a 1993 Taurus SHO around January 2025, and I’m trying to track down its history. I have a strong feeling the original owner (or someone who knows the car) is here on SHOforum, because this car definitely seems to have a story behind it. Car details / history I know so...
    • Tyler.m
    • Thread
    • 1993sho 3.0 to 3.2 swap mtx 93mtx built motor gen 2 help taurus sho
    • Replies: 2
    • Forum: Introduce Yourself
  2. S

    Generation II SHO body mouldling set

    $325 Generation II Taurus SHO moudling set off of a '93. These pieces are almost never found in salvage yards anymore. If you're lucky enough to still be driving one of these great machines and get into a repairable collision, it might be nearly impossible to find replacement moulding pieces at...
  3. SalukiSHO

    20 oz. CO2 paintball tank

    Hi everyone, I am looking for advice on where to mount a 20 oz CO2 paintball tank in my 1992. It has to be mounted upside down and somewhat near the dash. I tried under the dash but there is not enough room really without moving the fuse box. Right now I have it mounted near the shifter next to...
  4. devin1992

    Issue starting and stall at high rpm

    My 1992 Sho has been having an issue starting randomly recently, it will crank but wont turn over, but 1 hr later will start up perfectly, it will start if i give it gas while turning the key usually. I know it isnt the starter, battery or alternator they are all brand new. Just before the...
  5. Mack302

    Gen 2 Brakes sticking

    I've tried to look around to see if this has been discussed before but I've had little to no luck. I picked up a 92 SHO at the beginning of the year and I always noticed that after driving for around 15-20 miles then the brakes seem to stick. I have to physically pull the brake pedal up with...
  6. C

    1992 SHO for sale

    I have a 1992 SHO with 126,500 miles that I am sad to part with, but I think it needs to go to someone who will have the time to invest into it. The car located outside of Louisville, KY. I got this car from my uncle as my first car and have loved it ever since. But with a young family and a new...
    • CowMan
    • Thread
    • for sale gen 2 parts car sho sho for sale
    • Replies: 0
    • Forum: SHO Trader
  7. Crizcocane

    In need of crank position sensor

    I’m in the process of rebuilding an engine in a very clean red 94 MYX. I’ve found most the parts I need through various sources but can’t seem to locate a CPS. If anyone could either give me a website to purchase or has an extra laying around, even a good used one that would be awesome. Thanks...
  8. S

    In need of clutch help

    Did full bare block rebuild, got everything done and ready for first start up and there was a fuel leak on the fuel rail. So that is holding me up right now. I have to heli-coil a broken bolt that holds the fuel rail onto the heads and injectors... My main problem is there is no clutch pedal...
  9. D

    Intake manifold gunk

    I have a 1993 ATX with roughly 186,000 Mi on it. I had to take the intake manifold off in order to get the fuel injector pressure dampener changed and the thermostat changed. When I took it off I noticed a lot of gunk in the intake as well as above the valves I took pictures. what is it?
  10. A

    Intermittent: tach drops to 0, car jumps & bucks

    I can't be sure, but I believe that my SHO is the only gen 2 that my local ford dealer has worked on. 3 years ago, was having a problem with my 95 SHO not wanting to start at times. I'd be running errands, the car could start several times, then suddenly not start. I'd wait a few hours, then...

Latest posts

Forum statistics

Threads
107,077
Messages
1,181,194
Members
16,141
Latest member
grapnelg

Members online

Total: 962 (members: 3, guests: 959)

Share this page

Back
Top