802SHO 2010 Build

[kryptto]

Looks great, when dealing with the body and alignment not my forte ever. I couldn't imagine cutting through the shrouding to get into the frame to then bolt it in and get the right height. ugh

 

[802SHO]

The hood pins I had installed were a MAJOR PITA.

My body shop joked that they would never want to do that job again.

LOL.

Yours look good!

Sent from my SM-S928U using Tapatalk

100% accurate. Such a simple mechanism but 100% chance of rain lol! Another 1.5 hours tonight and I got 1 ready to begin drilling holes for the base plate.

 

[802SHO]

I ended up modifying the billet posts to not catch and bind on the hood. I beveled the back side of them and was able to finally complete the project.

 

[Majestic]

If this thing ends up running a 11.2 I'm going to be so ******.

Duke Nukem. And I know I've posted that before. Get it on the strip!

 

[802SHO]

If this thing ends up running a 11.2 I'm going to be so ******.

Duke Nukem. And I know I've posted that before. Get it on the strip!

The last setup ran 11.0. This will eat that car for a snack

 

[802SHO]

If this thing ends up running a 11.2 I'm going to be so ******.

Duke Nukem. And I know I've posted that before. Get it on the strip!

Jordan’s car ran 11.2 as like a light jog for his car. That thing is just warming up. If the 11.2 is what you’re referring to. 1.9 60’ and lost power at the 1000’ 11.2 is super impressive and clearly the car has a ton left in it at 35% or not even WGDC.

 

[kryptto]

The pins look great. Definitely a PITA project.

 

[6500rpm]

You need to post some detailed pictures of that engine bay. Damn son, you've got a lot of out of the box things going on.

 

[Zpak]

The last setup ran 11.0. This will eat that car for a snack

Pshhh, not with those stock cams.

 

[802SHO]

Pshhh, not with those stock cams.

Exactly. Without upgraded cams it’s all for nothing. Disinformation at its finest. Instead of +550hp it’ll only be +475hp…..clearly not worth it

 

[SM105K]

Exactly. Without upgraded cams it’s all for nothing. Disinformation at its finest. Instead of +550hp it’ll only be +475hp…..clearly not worth it

Technically the stock type turbos on these cars are the bottle neck.........

Since you have removed those you can only go UP!

 

[Majestic]

The last setup ran 11.0. This will eat that car for a snack

Man, I'm just messing with you. Your car is badass and I can't wait to see it actually hit the track.

 

[kryptto]

Man, I'm just messing with you. Your car is badass and I can't wait to see it actually hit the track.

he will tell us in advance when he plans to go, i would like to be in the stands.

 

[802SHO]

I’m going to street test it pretty thoroughly so will have plenty of foreplay to share before I hit a track.

 

[bpd1151]

Foreplay is ALWAYS a good thing!

Sent from my SM-S928U using Tapatalk

 

[SM105K]

GIGGGGIIDDDIIIDDDYYYYY GIGGGGIDDDDIIIDDDDDYYYYY

 

[Bluezone]

Looks like you're famous.

Don't let it go to your head though.

 

[Bronco2fan]

Hey, saw your FB video about the trunk lid, awesome shit. You should post it here too, so everyone without FB can see it.

 

[802SHO]

Heck yeah. Wish I could upload a video straight to here.

 

[802SHO]

Finally decided what to do with my trunk. Mimic the tailgate appliqué of the Raptor, with Ford. Bought a set of Gloss black overlays for the front grille of the truck and decided to buy 2 pairs, 1 for the SHO. Not quite done, I’m going to add gloss black vinyl shapes to the top of the trunk but here it is.
Then prepped the underside of the spoiler, using a dremel sand barrel, I removed the old double sided tape and bolt studs left over. A tiny piece of old 3 tape sanded down had some adhesive left to it and allows me to stick it in place to measure and mark the center with tape.
Then with all new 3M tape strips all around the perimeter, prepped with alcohol and extra strips in the center I attached it…finally. Thing ain’t going nowhere.
Finally able to move forward. Since the trunk is all matte metallic black (ghost) I’ll flip the vinyl wrap on the top of the trunk gloss black. I’ve got some more vinyl coming too. I really miss the Ford vinyl emblems I had on the front fenders and top of the hood and that’s going to be matte black. Despite the car metallic gloss black, the vinyl wrap black matte metallic…plain matte black ford logos will stand out and look great. Before I had them white. Anyway, moving along.

I had the vintage Paul Rand Ford logo design from 1966 powder coated matte black base and metallic gloss black letters. And my new PCV deleted valve cover is coated and I just got them today.