Zpak
Es Aich Oh!
One things for sure if you get the hp numbers you’re after, when whoever does whatever and the trans proves to hold up tell them to prepare for a line behind you for the same treatment.
bpd1151's 2010 SHO Rebuild Thread.....
- Thread starter bpd1151
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
bpd1151
Lurking Around
This is correct there Jordan.
I can't mention all the things being now.
Hahahaha.
Sent from my SM-N950U using Tapatalk
SM105K
Streetlight Grand Prix Champ/ IG @fafomotorsports
If he is smart.....he is twisting the 3.5 sideways, mating a built A10 to it, while sending the power through a real rear end and transfer case.......just like a GTR......
bpd1151
Lurking Around
I'm. Not. That. Smart.
Hahahaha
Sent from my SM-N950U using Tapatalk
Hahahaha
Sent from my SM-N950U using Tapatalk
SM105K
Streetlight Grand Prix Champ/ IG @fafomotorsports
Come on Meow!
Jeff2017
SHO Member
- Joined
- Jan 29, 2017
- Messages
- 810
- Reaction score
- 516
This sounds very expensive but it could result in the best SHO of ALL TIME.
4sfed
SHO Member
Ok wait a minute.....this wasn't posted until AFTER Jordan beat his best time.
So....this is YOUR FAULT JORDAN!
Sent from my iPhone using Tapatalk
So....this is YOUR FAULT JORDAN!
Sent from my iPhone using Tapatalk
Jordan_R
Stock Block Ready To Knock...er..Rock
Hey, if that's what it takes to get the platform FURTHER and FARTHER than ever before I am all for it! BPD has always had a killer build and I would love for him to absolutely abolish my record!Ok wait a minute.....this wasn't posted until AFTER Jordan beat his best time.
So....this is YOUR FAULT JORDAN!
Sent from my iPhone using Tapatalk
Zpak
Es Aich Oh!
...And besides, that’s cheating.
Well bpd can I just take mine to them and say do to mine what you are doing to bpds? Mine will be paid off soon and I need to spend the extra money making a bigger badder boat. I am sure it will cost me more as I'm not nearly as far along as you but, I am ready to take the plunge. I am assuming you aren't going to daily it at 1100 hp right?
Mine will be paid off soon and I need to spend the extra money making a bigger badder boat. I am sure it will cost me more as I'm not nearly as far along as you but, I am ready to take the plunge. I am assuming you aren't going to daily it at 1100 hp right?
4sfed
SHO Member
Well bpd can I just take mine to them and say do to mine what you are doing to bpds?
Ya know....the funniest thing to me? I remember worrying about the big block in a Camaro overheating if we get stuck in traffic too long. FORGET air conditioning...
I bet this would make an EXCELLENT daily driver with 1000 HP....stuck in traffic, WITH THE AIR CONDITIONING ON!
Sent from my iPhone using Tapatalk
bpd1151
Lurking Around
Ha!
You guys crack me up.
1k to 1,100 is the target goal.
Will it be achieved? Possibly.
Remember, on the "old" build, the highest crank hp was 805 (617 at the wheels). Which, I'll add, I was never able to run (due to perceived drivetrain limitations). With the current goal in mind, I'm already over that power range ofcourse.
Now, all things considered, if (emphasize 'IF') we are able to achieve the desired goal (of 1k to 1,100) then we're probably looking at anywhere from 800, to 900 hp AT THE WHEELS.
So umm, yea. We'll see how it goes
One thing's for sure, this current motor will be lightyears ahead of what I originally thought was a (term used VERY LOOSELY) "built motor".
Patience fellas. All in due time.
Sent from my SM-N950U using Tapatalk
You guys crack me up.
1k to 1,100 is the target goal.
Will it be achieved? Possibly.
Remember, on the "old" build, the highest crank hp was 805 (617 at the wheels). Which, I'll add, I was never able to run (due to perceived drivetrain limitations). With the current goal in mind, I'm already over that power range ofcourse.
Now, all things considered, if (emphasize 'IF') we are able to achieve the desired goal (of 1k to 1,100) then we're probably looking at anywhere from 800, to 900 hp AT THE WHEELS.
So umm, yea. We'll see how it goes
One thing's for sure, this current motor will be lightyears ahead of what I originally thought was a (term used VERY LOOSELY) "built motor".
Patience fellas. All in due time.
Sent from my SM-N950U using Tapatalk
Jordan_R
Stock Block Ready To Knock...er..Rock
When you are prepped and ready to destroy the record when the build is coming to an end let me come up from Missouri to Illinois and I can get some wrenches in hand on some weight reduction like I am known for! Hahahaha! For the glory run of course! Record needs to stand for another 8 years after you are finished with this!
Johnbigdog
SHO Member
So will any of the Ford GT parts be used for this build?
Jordan_R
Stock Block Ready To Knock...er..Rock
Going over the parts with my parts guy you have to have viable proof of ownership and call the Ford GT concierge to even get prices on the majority of the parts. They aren't actively selling any of it to the masses and the parts you can get prices on are up to ten grand. Probably just easier to build a SHO platform block and less expensive in the long run at that as well.
SHOCH
Tommy Boy
SHO Convention 2020
Carfest at Pittrace Labor Day Weekend
BPD vs Blue Turd Round 2.
Five years in the making....
Carfest at Pittrace Labor Day Weekend
BPD vs Blue Turd Round 2.
Five years in the making....
Johnbigdog
SHO Member
I think we can throw the money thing out the door at this point.
Tim Teague
Member
I'm so subscribed to this. bpd your determination and positive attitude are inspiring. The MKS will never go down this road but it's cool to see what it's brother is capable of. Looking forward to progress reports updated even if they're small and seemingly insignificant.
BTW I'm Black Dream on ecoboostperformance. I need to get my screen name here changed.. .
BTW I'm Black Dream on ecoboostperformance. I need to get my screen name here changed.. .
Similar threads
