bubba
ATX Connoisseur
I wanted to see if anybody has a side by side ATX mount and a renforced MTX? I need to see as I want to make a renforced ATX mount
ATX mount next to a renforced MTX mount
- Thread starter bubba
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1993MTXSHO
Its a Taurus...
I don't think that's going to help ya bubbles, those mounts are very different in design unless you got soem tricks up your sleeve. Id see if you can find some guys on here who have already reinforced the atx mount
quikSHOilver
Yamahaized
Broken reinforced atx mount made by Hypermike after 2 year of abuse
So I decide to fabricate torque limiter along with stock mount, it work great now more bite even make 2 wheels burnout instead of one wheel peel.
Some people use steel cable wrap around subframe to whatever they find on engine. Be creative!
SHObill
'The Collector'
nicely done Quick!
I would like any other pics you have of that!
I would like any other pics you have of that!
bubba
ATX Connoisseur
that's quick I will have to get the juice's flowing, and birdman I would want more ATX people to start loving the ATX's and start post in here and maybe when the time comes get a group buy worked out too.
quikSHOilver
Yamahaized
More Pics
I used energy suspension sway bar link and cut it short to fit.
See the notch on side of support bracket to clear air conditioner's end.
I used energy suspension sway bar link and cut it short to fit.
See the notch on side of support bracket to clear air conditioner's end.
1993MTXSHO
Its a Taurus...
Fo SHO, atx's are no where near as "lame" as everyone thinks. But yeah my front atx mount is ripped and leaking oil all over the place, but didn't fail 100% yet. I'm going to have to make a reinforced mount soon since I have the tweecer on my atx and it damn near chirps shifts now
Anyone who has an atx needs to get the tweecer and mess with the tranny, it makes the car 100% more fun
Phoenix
SHOHOLIC
MTX mount modded to fit the 3.2.
quikSHOilver
Yamahaized
Phoenix, That's nifty idea!! Now I am thinking of making it possible to use 3.2's accessories pulley and belt to put on for mtx! Thanks!
Uh oh after little look up close and notice on your sig that u done atx-mtx swap... is that mount you fabricate currently on mtx's?
Uh oh after little look up close and notice on your sig that u done atx-mtx swap... is that mount you fabricate currently on mtx's?
Last edited:
hawkeye18
Sorta cares
Fo SHO, atx's are no where near as "lame" as everyone thinks. But yeah my front atx mount is ripped and leaking oil all over the place, but didn't fail 100% yet. I'm going to have to make a reinforced mount soon since I have the tweecer on my atx and it damn near chirps shifts now
I can personally attest that the firm shifts afforded by the TwEECer will ruin a front motor mount in short order. Mine is ripped in two as we speak.
Eric VerValin
PiMPSKiLLET
LoL @ Bubbles...
bubba
ATX Connoisseur
Eric VerValin
PiMPSKiLLET
I am sooooo happy to see someone else say that... lol I feel somewhat vindicated.. I don't think I've said it here on the forum... just when you stop out I think..
1993 and I have somethings in common it would seem.
I don't think I've said it here on the forum... just when you stop out I think.. 1993 and I have somethings in common it would seem.
bubba
ATX Connoisseur
I am sooooo happy to see someone else say that... lol I feel somewhat vindicated..
1993 and I have somethings in common it would seem.
As in the only people that I don't **** for saying that lol, Yup lol it's all in good fun and I'm for fun lol.
I think I might be able to get some thing to work on this thing. I just need to find what works for this
Phoenix
SHOHOLIC
Yes I have done the swap , yes I have the full 3.2 with all the 3.2 accessories mated to a MTX. BUT this is not the simplest route. The rear mount needs fabbing too We took a 79 conv mustang mount we had in stock for the rear one. as pictured:
This is on a MTX subframe BTW.
Mike93
Go Sabres!!!
Check my sig for pics (cardomain link) of how I mated MTX and ATX mounts to convert my ATX to an MTX...was quite easy actually
quikSHOilver
Yamahaized
Check my sig for pics (cardomain link) of how I mated MTX and ATX mounts to convert my ATX to an MTX...was quite easy actually
YOU, SIR are a master fabricator! I like what you done!
1995mtxsho
SHO Member
Check my sig for pics (cardomain link) of how I mated MTX and ATX mounts to convert my ATX to an MTX...was quite easy actually
Any chance of getting some measurments on those peices?
1993MTXSHO
Its a Taurus...
I am sooooo happy to see someone else say that... lol I feel somewhat vindicated..
1993 and I have somethings in common it would seem.
:hdance:
Similar threads
