ajd32186
New Member
I bought a 93 mtx and there are alot of wires near the clutch that are not connected.
does anyone have a wire diagram so I can rewire my sho?
does anyone have a wire diagram so I can rewire my sho?
Wire diagram to rewire 1993 mtx
- Thread starter ajd32186
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
jmpSHO2nd
SHO Member
Does it run and does everything work?? It's possible that it was from an aftermarket alarm.
ajd32186
New Member
help me thank you
the door locks dont work, the turn signals also dont work. so far thats all i know. I am replacing the valve covers gaskets right now in the garage and figured I would Fix the speedometer and fix the wiring since there are a bunch just hanging next to the clutch.
if anyone has some diagrams or website that shows wiring and fuse box details let me know.
I'm also looking for a airfilter box? my sho came with a k&n filter and i want to set everything back to stock.
the door locks dont work, the turn signals also dont work. so far thats all i know. I am replacing the valve covers gaskets right now in the garage and figured I would Fix the speedometer and fix the wiring since there are a bunch just hanging next to the clutch.
if anyone has some diagrams or website that shows wiring and fuse box details let me know.
I'm also looking for a airfilter box? my sho came with a k&n filter and i want to set everything back to stock.
the4biddendonut
Hurry up meow.
The air box is the same as a SLO and can be had for pennies at a local U Pull.
my 1991 sho mtx
i have a 1991 mtx sho thats has a gen i stereing and a gen II body i just put an engien from a 89 gen I sho and was woundering do i have to change the wiring harness from my 91 engine onto the 89 engien and also need to know were the positive batter connecotr is ran to and grounded on as when the negative is ran and grounded. i have extra plugins on the 1991 wireing harness that the 1989 engine dosent have the plugs are right by the transmission below the air intake system plz send pics
i have a 1991 mtx sho thats has a gen i stereing and a gen II body i just put an engien from a 89 gen I sho and was woundering do i have to change the wiring harness from my 91 engine onto the 89 engien and also need to know were the positive batter connecotr is ran to and grounded on as when the negative is ran and grounded. i have extra plugins on the 1991 wireing harness that the 1989 engine dosent have the plugs are right by the transmission below the air intake system plz send pics
Similar threads
