4sfed
SHO Member
if 1 Bar is 14.5 PSI, why are people changing our the 2 Bar MAPs for 3 Bar MAPs? Wouldn't a 2 Bar MAP be good to 29-ish PSI?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
2 BAR or 3 BAR simply mean two or three times above barometric pressure. The sensor will measure each direction, vacuum or pressure.
For reference:
- 1 BAR is for a normally aspirated engine
- 2 BAR will handle a forced induction up to 14.5 psi of boost
- 3 BAR will handle a forced induction up to 29.0 psi of boost
Do it, you will be pleased.I’m thinking the stage 1 pkg from Livernois is my choice for the tune.
I’m thinking the stage 1 pkg from Livernois is my choice for the tune.