whats the Most hp a SHO has ever made?

[TT SHO PROJECT]

soo has anyone maxed out a shos block/crank yet??


whats the max hp Anyone has Ever made? i think someone on here said they make Almost 700hp at the crank... i really want to see someone make 1000hp in a sho (yeah i know unlikely since its fwd)

-Bob.

 

[SuperchargedSHOguy]

texantony has the most. The engine maxes out at 430whp

 

[SHOMurph]

It would be great to have a dyno day at the convention.

That way everything would be equal and we can don someone a dyno queen.

 

[SuperchargedSHOguy]

I'm game if I get off my ass and fix my 91...however I will definitly not be near dyno queen title

 

[Revere sho]

thats the most on a stock motor right? what is the most anyone has coming out of a sho in general. reason i ask cause awhile back i seen someone saying they have 601whp, is that true? if so what needs to be done to get there cause i want to do it my sho isnt fast enough.

 

[TT SHO PROJECT]

thats the most on a stock motor right? what is the most anyone has coming out of a sho in general. reason i ask cause awhile back i seen someone saying they have 601whp, is that true? if so what needs to be done to get there cause i want to do it my sho isnt fast enough.

i dunno how true it is but i heard the same thing a while back as well.

 

[Axianator]

i dunno how true it is but i heard the same thing a while back as well.

The fallacious 601whp figure you are thinking of was a rumor that was started some time ago about TexanTony's SHO. At the time, the figure was just hearsay; however, now that his car has been outfittted with some new 'go-fast' parts, that figure could be attainable.

Guess we'll have to wait and see ...

 

[TT SHO PROJECT]

The fallacious 601whp figure you are thinking of was a rumor that was started some time ago about TexanTony's SHO. At the time, the figure was just hearsay; however, now that his car has been outfittted with some new 'go-fast' parts, that figure could be attainable.

Guess we'll have to wait and see ...

oh i cant wait!!!! im Dieing to see how much power this engine can take! come on texantony!!!! crank up the power!!! set some new standards for us FI sho owners!

 

[Toolman]

Tony will never make more than 430whp.

 

[dishcore]

the most powerful sho ever recorded is the imaginary one that i don't own.

40,023 hp at 300 psi septuple-turbo running 8,000 octane atomic waste. my spark plugs are powered by direct linkage to the sun. the block has been bored twelve feet over and the crank has been offset ground by the lenght of the golden gate bridge. my intake AND exhaust valves are cryotreated unobtanium and the pistons are cast replicas of chuck norris' skull. many would say i should be running low compression for this monster-boosted setup, but i have it set at a conservative "infinity:1"

oh, and i have a cone filter.

me + rediculous = fun.

 

[SHOMurph]

the most powerful sho ever recorded is the imaginary one that i don't own.

40,023 hp at 300 psi septuple-turbo running 8,000 octane atomic waste. my spark plugs are powered by direct linkage to the sun. the block has been bored twelve feet over and the crank has been offset ground by the lenght of the golden gate bridge. my intake AND exhaust valves are cryotreated unobtanium and the pistons are cast replicas of chuck norris' skull. many would say i should be running low compression for this monster-boosted setup, but i have it set at a conservative "infinity:1"

oh, and i have a cone filter.

me + rediculous = fun.

thats because you were at 10,000 feet.

 

[twr]

Didn't Josh get 456hp and 350lb/tq?

 

[Axianator]

Didn't Josh get 456hp and 350lb/tq?

Close ... see below.

http://www.shoclub.com/membersonly/joshturbosho.htm

 

[Mac]

Axianator, is that your phone number under your name?

 

[jeanrw2000]

i found this in another thread.

there was SycoSHO owned by Sung Choi. stroked 3.6L with a 12 lb vortech s-trim blower. something ridiculous like 540 whp and a whole lotta torque.

Aparetly there is a link here on the forum to the dyno numbers and some pictures but i couldn't open or see any of then.

more like mystery SHO

 

[Toolman]

Close ... see below.

http://www.shoclub.com/membersonly/joshturbosho.htm

Surely Josh is making more now with the MAF, injector, Tweecer upgrades. Has he not dyno'd since then? I would like to see another SHO over the 400ft lbs mark (of course, if Tony would ever post his dyno numbers, his REAL dyno numbers).

Next goal, 500ft lbs!!! You up to the task Tony? I will even let you use that silly nitrous.

 

[Axianator]

Surely Josh is making more now with the MAF, injector, Tweecer upgrades. Has he not dyno'd since then?

While he has likely exceeded the 465whp mark by now, he has not bothered to dyno the new setup.

I would like to see another SHO over the 400ft lbs mark (of course, if Tony would ever post his dyno numbers, his REAL dyno numbers).

Would you accept a Gen 2 ATX with 400lb/ft instead?

 

[Toolman]

Indeed, indeed! You will very likely embarrass us MTX guys @ the strip. Wait a sec, how are you getting 400ft lbs?

 

[Axianator]

 

[Axianator]

Indeed, indeed! You will very likely embarrass us MTX guys @ the strip. Wait a sec, how are you getting 400ft lbs?