vibration and noise when turning and leting clutch out

[91 SHO Black]

when at a stop i'll dry turnthe wheel and start to go (let out the clutch) and sometimes it'll do this odd vibraty noise.and i can feel it in the stiering wheel. what the **** is it.

 

[llamaking122]

sounds like a subframe bushing or tranny mount. but i could be wrong

 

[CademiaX]

Its your flux capacitor!! Ok kidding...

I have the issue on my 95, I will be doing my subframe bushings soon. I am going to drop the subframe and the engine out tho, so I guess soon will be longer then I think.

Ill let you know if it solves the issue.

 

[SHOGUN88]

Mine has done this every so often, but its not my subframe bushings.

 

[sperold]

Subframe bushings.
Test for clunking during braking and acceleration also.

 

[mike25]

Mine make's a light clunk when im turning left it only does it when im moving i can turn the wheel stopped and it dosent do it.anyone know what this could be?

 

[K-Dawg]

Strut mounts, endlinks, axles are some other options

 

[sdpatt]

Does it make the standard "clacking" of a worn CV joint when you apply any gas in a tight turn? That would be a CV joint. If so, just get a remanufactured CV halfshaft for about $60 with a lifetime warranty. Much easier and cleaner to replace than a CV jont boot.

 

[mike25]

I drove it today and it does it sometime's when stopped but mostly when moving while im turning left or right. when i start turning it will pop once.and once when i straighten the wheel. sometimes it doesent do it at all.

 

[mike25]

I drove it today and it does it sometime's when stopped but mostly when moving while im turning left or right. when i start turning it will pop once.and once when i straighten the wheel. U can feel it pop through the steering wheel.sometimes it doesent do it at all.

 

[mike25]

Sorry for posting two of the same i didnt think the first posted.

 

[llamaking122]

yeah sounds like sub-frame bushings