Tweecer help please.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

whiteguy3

Scott MacIntire
Joined
Jun 18, 2007
Messages
799
Reaction score
91
Location
Silver Spring, MD
yeah, it's a bit different. Load based, 2 spark tables (which you can just minimize to one after a process of taking the higher of each value in each box between the borderline and base spark table.) The trans tuning is actually pretty straight forward.
 

whiteguy3

Scott MacIntire
Joined
Jun 18, 2007
Messages
799
Reaction score
91
Location
Silver Spring, MD
BTW I'm loading the 80mm MAF from the Shonut website and I believe it is wrong. The .maf file that comes with the Tweecer software I believe is correct. The one from the Shonut website is clearly different than the one's pictures above. Everyone should be using the one from the Tweecer MAF directory. Someone else should try it out and check back.

Instead of gradually sloping it steeps fast and then tops out above halfway through the curve versus the one in the Tweecer MAF directory looks like the one pictured above.
 
Last edited:

yamahaSHO

E85 whore
Joined
Jul 25, 2002
Messages
10,646
Reaction score
2,516
Location
Arkansas
yeah, it's a bit different. Load based, 2 spark tables (which you can just minimize to one after a process of taking the higher of each value in each box between the borderline and base spark table.) The trans tuning is actually pretty straight forward.
I've got more than 2 spark tables available on the MTX.
 

Forum statistics

Threads
107,077
Messages
1,181,196
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top