marbs
New Member
So is anybody running a D4U1 with their TwEECer? If so please let me know I have a couple questions I NEED help with.
TwEECer D4U1
- Thread starter marbs
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Phoenix
SHOHOLIC
Yea me , cant communicate with the EEC through it yet , I posted on the tweecer forums , I think we did forgot some things in the installation in the software , will reinstall everything to see if its that.
Whats your issue?
Whats your issue?
egroce11
New Member
Get a hold of seanmc from the forum, I've been talking to him and he has the D4U1 working and data logging.
HotRodKid
mmmmm ... turbo
me / somedude have run the tweecer w/ the d4u1 eec ... posting your questions might help 
SeanMc
NoMoSHO
Not entirely. I'm not going to do any more tuning until I get my issue fixed (cutting out, and lean on 1 bank).
Axianator
I am a banana!
*crickets chirping*
1slickRED89
Guest
I'll post up a question. I had to reinstall the calcon/caledit software on my new laptop and now It won't data log at all, gives some error code(" is not a valid integer value). I use the ultimateserial driver to log AFR and I think that has something to do with it. I know there are specific instruction on how to add the tweecer driver when the software is installed and I followed them to the T, I don't understand why it doesn't work. suggestions?
edit found the problem I needed to pick that I had the dataQ 194, that option was not there befrore.
edit found the problem I needed to pick that I had the dataQ 194, that option was not there befrore.
Last edited:
marbs
New Member
Sorry I've been really busy lately and haven't been on the comp for a while. Well I was working with Ernie(egroce11) to get my TwEECer up and running and he told me I needed the High and low injector slopes. It seems that every application in the program has these except for my D4U1 setting. Anyone know why or what I need to do to fix it?
HotRodKid
mmmmm ... turbo
uh search the internet for "injector slope"
use the math supplied in those search results to calculate your slopes (warning, this is just a starting point)
what size injectors are you even running ? thats kind of a needed tidbit here
stock 3.0 ?
stock3.2 ?
aftermarket (insert lb/hr rating here)
use the math supplied in those search results to calculate your slopes (warning, this is just a starting point)
what size injectors are you even running ? thats kind of a needed tidbit here
stock 3.0 ?
stock3.2 ?
aftermarket (insert lb/hr rating here)
Similar threads
