**** the power antenna?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DavidT

SHO Member
Joined
Jan 10, 2002
Messages
3,415
Reaction score
15
Location
TN
I put a new mast in about a year ago. Whan I manually raise and lower it, it seems to "stick" a lot as it moves. Is there a lubricant that will help, or is the problem inside the housing where the plastic teeth wrap around the gear (in the motor)?
 

poissonverte

New Member
Joined
Feb 8, 2001
Messages
312
Reaction score
1
Location
iowa city, ia
If you **** it with some oil stuff and its up.. that oil is going to collect dirt and stuff.. bad idea.. just clean it really well with whatever you want, but make sure there isnt an oil residue on it..

You might need a new mast too.. Be happy those are cheap
 

Mongo

New Member
Joined
Mar 16, 2002
Messages
44
Reaction score
0
Location
Baghdad, Iraq
Project89SHO is correct. These antennas leave just a bit to be desired (I'm being very polite.) If you currently have slippage, replace antenna (easy job, do "Mongo" search) AFTER removing the motor unit and performing maintenance. Currently have one with power antenna, another with SLO fixed. It doesn't increase wind noise, and when are you not listening to tunes while in the car?
 

munkee

Too busy...
Joined
Oct 25, 2001
Messages
823
Reaction score
6
Location
Missoula, MT
A lot of auto parts sell a heavy duty silicone spray. Just spray it on, let it dry for a little while then wipe off the excess. You could also try a little graphite powder. The silicone also works well for shining up plastic and rubber parts and for your weatherstripping and for.....well, you get the idea.
 

NotSoSlowSHO

Gas is $$ WALK!
Joined
Nov 9, 2002
Messages
5,103
Reaction score
420
Location
Moscow, IDASHO!
Ive always used a teflon-based bike chain **** spray for things like this... I use it on door hinges and other pivot points as well.

It is teflon-based with alcohol do it dries quick to a lubricating powder, and doesnt attract dust.

it smells kinda funny but works excellent thumbs_u
 

89 Gary

New Member
Joined
Apr 6, 2001
Messages
215
Reaction score
0
Location
Millbury, Ma.
Simply spray some paper towels with WD-40 and wipe in the bottom to up direction. Now,put mast down and up and do it again, you'll be set until it gets dirty again.
 

Bizzy

SHO Member
Joined
May 1, 2001
Messages
13,222
Reaction score
1,462
there are a few bike chain lubes that use a wax as a base. Pedro's Ice Wax in a can worked amazing on mine. Plus once it dries it really won't attract dirt.
 

smcallis

New Member
Joined
Jan 23, 2001
Messages
263
Reaction score
0
Location
Hudson, NH
Great idea on the wax guys. I never even thought of that. I use it on my mtn bike...the wax is used to minimize dirt attraction. I've been cleaning and reoiling my antenna masts on a fairly frequent basis. I'll try the wax.
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,141
Latest member
grapnelg

Members online

No members online now.
Back
Top