sho body logo painting/decals

[sho_u]

whats up all,
just wondering???
i want to highlight my sho logos that are on the doors and rear bumper cover.
whats the best way to do this? paint or decals (if decals are avail and where)
my sho is red, what whould be the best color to use on it?
anyone have any pics???
thanks
bryan

 

[ohioshodude]

i used pinstripping, works really well and only highlights the ridges in the gen II logo. and make a perfect straight line, which is hard to do with paint. mines been on my sho for about 4 years now and just minimal signs of wear. a couple of the edges are coming off, easily fixed with some glue.

 

[dagcakes]

I got mine from Bob White Decals. Since I have chrome slicers, I got the chrome inserts. Check out my sig pic. Chrome on a red '95, the only way to go!!!

 

[KPT]

I used paint on mine, glossy krylon paint. I went with white, and I'd say white would look the best on a red SHO, although the chrome on dagcakes looks nice.

 

[sho_u]

painting /striping logos

what looks better ??
paint/decaling the high ridges or the low spots on the logo???

 

[F-22 Raptor SHO]

I used a paint stick (magic marker head used to dispense paint). Walmart has some in the model car section made by Testors. 3 color pack for like 5 bucks. I used black on a white car...white on a green car....I like it and it has lasted a year with no need for touching up. NO peelage or fading. Took me all of 20 min to do all the lettering on the car. You can see alll my body fill lettering at my car domain site.

 

[91 SHOplus]

The decals are all over ebay on any given day, although I agree with Michael, (F22 Raptor) and I used a paint pen as wll. I did silver fill-ins on the green and it was the shiznett!

Personally, I would consider black fill-ins on a red car.

 

[TheKrazyRaven]

i went the paint pen route

 

[91taurisho]

what color would you use to fill them in on a '91 mocha frost?

 

[sho_bc]

what color would you use to fill them in on a '91 mocha frost?

black.

and black on the red as well.

 

[91taurisho]

that's what I thought too! Thx!

 

[DDakRT]

I have copper on my green Gen II.

 

[91taurisho]

That copper and green sure looks nice!

 

[Red Baron]

I used silver spray enamel from Testors....almost looks like it glows...

 

[750sho]

There's this kid that i know that used yellow paint on his green car. Actually, i don't know him, just have seen him around. If i knew him, i'd slap him. It looks like a John Deere Taurus...

 

[91taurisho]

LOL! I was thinking Green Bay Packers colors...

 

[shoble]

My wife used the chrome stickers on her 94 opal frost. Got them off of Ebay about a year and a half ago.

 

[Sho_Freak]

i taped it off and used black satin krylon, it has a very nice contrast with how shiny my car is.....

 

[Sho_Freak]

i taped it off and used black satin krylon, it has a very nice contrast with the red.....

and to finish it off, get a paintbrush and do the centercaps, it looks good w/tint and filled body lettering

 

[SASHO91]

i have a green 93 and i spray painted mine with a layer of black then put a top coat of green to blueish purple cameleon. looks sweet in the light especially when driving by it or passing somone up. and the kool thing is is that the green that is the base in the cameleon? is almost the same color as the car, not excatly but dam close. up next im doing either a yamaha emblem on the hood or ford oval, both in cameleon, im going to go with the yamaha emblem.