SHO bi/twin Turbo

[Bob Gervais]

Maybe others are bi-curious too and you fuktards are mucking it up.
This thread is like riding behind Ryan in the Ninja Turtle in NH, everyones off track now!

Side note: my three closest friends seem OK.

And 3.2 cams only make more power if you weld them first.

 

[nothingtoseehere]

Side note: my three closest friends seem OK.

And 3.2 cams only make more power if you weld them first.

What ab out 3.2 cams on the front and 3.0 on the rear?

 

[Bob Gervais]

In a 3.4, yes.

 

[St Louis SHO]

My 4.0l SHO motor has 3.2 cams.

 

[nothingtoseehere]

So a 3.4 with 3.0 rear and 3.2 front would be 9.6 right? How much boost and naws could a 9.6 SHO handle? And can I add a 10 speed trans? I had a 10 speed bike as a kid and it really helped having 10 speeds as opposed to the fixed gears I had.

 

[Bob Gervais]

So a 3.4 with 3.0 rear and 3.2 front would be 9.6 right? How much boost and naws could a 9.6 SHO handle? And can I add a 10 speed trans? I had a 10 speed bike as a kid and it really helped having 10 speeds as opposed to the fixed gears I had.

Yes, unlimited, yes, and I hear ya!

 

[Bob Gervais]

My 4.0l SHO motor has 3.2 cams.

I built a 4.6 stroker using a Vulcan block (which is the same as the SHO block btw), Essex rods and pistons, and a 5.0l crank.

Speaking of 5.0...

Yo Randy let's kick it...

 

[nothingtoseehere]

Alright STOP.....................collaborate and listen

 

[Bob Gervais]

http://www.youtube.com/watch?v=rog8ou-ZepE

 

[cetroutt]

what if i weld two 3.2 blocks together and then weld some 3.8 cams from a SLO together? that would make a V12 right? and then if i supercharged it then twin turboed it what kind of power would i be looking at.

 

[nothingtoseehere]

http://www.youtube.com/watch?v=rog8ou-ZepE

Yeeeeeaaahhhhh boooooyyyyy

[youtube]zNJ8_Dh3Onk[/youtube]

 

[Ian Macoomb]

^ Rudy's hero right there.

Or was it that other Douchecanoe Prince?

 

[SHOCH]

No Ian, it's "Summers Eve" canoe Prince in this thread.

 

[Bob Gervais]

what if i weld two 3.2 blocks together and then weld some 3.8 cams from a SLO together? that would make a V12 right? and then if i supercharged it then twin turboed it what kind of power would i be looking at.

11ty,000

 

[-DVP-]

This thread is still going? Nothing like some good old fashion raTard entertainment

 

[Bob Gervais]

Lmbio

 

[ForcedSHO]

 

[FastAndFurious]

I'm surprised this thread hasn't moved or locked yet.
I mean seriously?

 

[Bob Gervais]

 

[bubba]

This thread has a lot of win in it!