Replacing Headlights

[0V3RC10CK3D]

I've searched high and low but can not find a guide for how you replace the headlight casings, I bought some brand new sable lights and I'm looking to get them installed without breaking anything. LOL.

 

[LOUDSHO92]

Just pull up on the clips. I found grabbing from the side helps. The top of the tabs do tend to brake off.

 

[0V3RC10CK3D]

It looks like it's mounted into this black part behind it, which is screwed into the frame...do i take out the black piece with it? or no?

 

[SHOwener1986]

no you dont, there should be clips right behind the black headlight bezel. Just pull the clips up and the headlight comes out. I used a right angle set of needle nose and it worked great w/o breaking anything.

 

[0V3RC10CK3D]

I know its a lot to ask but does anyone have a picture floating around of what I move? I hear its easy to break something and i don't want to mess it up.

 

[0V3RC10CK3D]

Took a picture myself

http://img174.imageshack.us/img174/1557/headlightsil7.jpg

These 3 clips? and the black plastic thingy stays behind? How do I get those clilps off, w/o breaking them. It's raining outside so I couldn't inspect them very well

 

[LOUDSHO92]

Yes those clips, and the black part stays.

Just pull up. To help you can open them up a little and they will come out easier.

 

[93rev2sev]

Bent a coat hanger at the ends. Put the ends in the holes. Pull up while spreading the little holes.