Hey guys. My 94 atx needs new struts and i snapped the pinch bolt. Started to drill it out and it's not going well so I want to grab another spindle/knuckle from the jy. Any ideas what year rears will fit? I haven't seen any sho s but there are a couple gen 2 that might be a pain to get off. Lots of gen 3 up there
rear spindle
- Thread starter Banshee
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
TimboSHO
Intermediate
That would be correct. Remember to always use heat to get the pinch bolts out in the rust belt or they WILL snap. Learned that years ago the hard way.
Yeah. Just got back from the my and they won't let me take any kind of torch in so all I had was pb blaster. Only 2 cars there that will work and one is all ready snapped off. Sprayed the last one real good and took everything I could apart. Ill go back Monday if I can't find one online for sale
luigisho
SHO Member
You could just pull it with the whole strut or cut the strut and work on removing the bolt or what's left at home on a bench. People have drilled them out and if the threads are damaged they use a nut and bolt instead
Similar threads
