Oil filter adapter gasket

[CallMeBronzy]

Can’t seem to find an oil filter adapter gasket , OEM part number is F6DZ-6840-AA. Anyone ran into this before found a solution?

 

[gamefanatic]

Shosource...

Oil Cooler "O"-ring (Gasket Replacement) (89-99)

The OEM gasket has long been obsolete but we found an O-ring that works just as well as the OEM gasket. This replaced the O-ring for the oil cooler to the block. Tech Notes These gaskets were designed for the 89-95 3.0L & 3.2L V6, and 3.4 V8 SHO engine. Free shipping is for the US only...

shosource.com

 

[CallMeBronzy]

Shosource...

Oil Cooler "O"-ring (Gasket Replacement) (89-99)

The OEM gasket has long been obsolete but we found an O-ring that works just as well as the OEM gasket. This replaced the O-ring for the oil cooler to the block. Tech Notes These gaskets were designed for the 89-95 3.0L & 3.2L V6, and 3.4 V8 SHO engine. Free shipping is for the US only...

shosource.com

I believe this o-ring is for the cooler to the adapter, I’m looking for the flat gasket that goes from the adapter to the block itself.

 

[Texas Marauder]

Number 2, maybe make your own. The OEM was probably rubberized metal. Gasket paper would probably work OK.

 

[CallMeBronzy]

Going to try doing that today, couldn’t find a picture of the original gasket so I’m not sure why style it is

 

[gamefanatic]

Maybe this will help?

 

[Majestic]

Going to try doing that today, couldn’t find a picture of the original gasket so I’m not sure why style it is

Tracing paper and an exacto knife. Transfer to gasket material, trim to fit.