Non JBL sound wire harness

[93EmeraldMTX]

alright, if its been posted before i couldnt find it, but im not sure what wiring harness to get. i went to best buy and had the guy go get a harness for me, # BBFD02AB, "scosche" harness, but right on it it says "non premium sound/JBL connector" upon telling him i have premium sound, he says "it should work anyways" so i take it home.

well, the two harnesses in it both plug in, one to the one hooked to my origional head unit and the one for the normal taurus head units that was off to the left, and it looks like by the wrapper from the head unit i need to use both, but i dont understand why if the stock CD player didnt have to. also, these harnesses only have the one end with the other ends with open wires. later i also noticed on the package that it says "not for use on facotry amplified sound systems"


long story short, does anyone know what harness i can buy at best buy that i need? i have premium sound with factory cd player, gen 2. my new head unit is a poineer if that matters.

 

[Camarok]

i believe you need to get the amp bypass kit thingy....

 

[93EmeraldMTX]

i believe you need to get the amp bypass kit thingy....

yeah im going to pick that up, i just think he gave me the wrong harness for the head unit too.

 

[Camarok]

well yeah thoese guys arent MECP certified for nothing!!! cept to give you the wrong stuff

 

[shoteen95]

before i installed the JBL amp/sub into my 95 (which had just the "premium" sound) i had some infinity speakers and a 50X4 HU. Noticed i had an amp by pass installed from the previous owner having an aftermarket HU and the stock speakers. I plugged the amp back in and my own personal opinion was that it sounded a lot better then running without it. Points being, i dont think you need the amp bypass if you have better speakers (which i strongly recommend), but hey, anyone need an extra bypass harness