No Brake Fluid

[RANDYJ]

so i read all the threads about brake problems in the rear of the sho. here is what i have changed, master cylinder, rear right caliper 2x, rear right brake hose, rear right brake line. still little or no flow out that caliper. tried compressing suspension still no flow. what gives, im about to burn my car. i has 94k miles and is a 1995 atx. the car runs strong and has on other problems. can i have a defective rubber line? help please.

 

[Ishodu]

Did you try removing the bleeder screw? I have seen dirt and rust plug them enought to stop flow.

 

[RANDYJ]

yeah, thanks for the quick reply, yes i swapped the right and left bleeder screws. and the new calipers had new screws also.
thanks

 

[Entropy]

When you replaced the hard line to the rubber, were you achieving flow to the rear bias valve? If not, when you replaced the master cylinder, were you getting flow out of the front proportioning block? I hate to say it's the obvious answer, but start tracking fluid back to the resevoir....