My Engine rebuild... NEW PICS PAGE 5

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SHO_DOODmorrris

Owner & Fanatic
Joined
Sep 19, 2005
Messages
1,062
Reaction score
111
Location
Alberta
yeah someone had a remotemount at the muffler location on a car. i think ill call my local performance shop. **** i just want to start this thing up...
 

SHO_DOODmorrris

Owner & Fanatic
Joined
Sep 19, 2005
Messages
1,062
Reaction score
111
Location
Alberta
Update. Oil pump will be here tomorrow. on another note i took her out for a rip tonight N/A after finding my gremlin. pulls pretty hard for a low compression engine lol only took it up to about 5k and half throttle. got quite a few looks as i have no bumper skin, hood or exhaust on (just the up pipe) good fun, will update tomorrow when turbo is on and poil pump installed.

-mitch
 

SHO_DOODmorrris

Owner & Fanatic
Joined
Sep 19, 2005
Messages
1,062
Reaction score
111
Location
Alberta
sigh... got everything hooked up and it happens that i bought a pump that only flows at about 1.8l per min and my turbo drains oil at a minimum of 2l per min at idle and minimum 3l per min above idle. WTF i cant catch a break. w/e buy cheap buy twice, i broke my rule.

-Mitch
 

SHO_DOODmorrris

Owner & Fanatic
Joined
Sep 19, 2005
Messages
1,062
Reaction score
111
Location
Alberta
Man... im super frustrated today. decided to drop the pan and try to use my other pan and locate the bung to the front vs. the back and see if my gravity drain would work... so i dropped the pan mesured like 300 times and scoped it out for the best place (by best place i mean ONLY place) looks like between the starter and the exhaust manifold. drilled my hole put my bulkhead fitting through and threw a 45 degree fitting on and its WAYYY too tight. its not gonna work. god im so sick of this drain issue i wish i could just drive my ******* car.
 

NovaSS

Project MINIGUN
Joined
Aug 22, 2005
Messages
532
Reaction score
580
Location
Maryland
I have learned nothing happens fast with working on a sho, you want parts... WHEN ????? ha ha ha ha is the responce you get.
 

SHO_DOODmorrris

Owner & Fanatic
Joined
Sep 19, 2005
Messages
1,062
Reaction score
111
Location
Alberta
nah they come in decent time other than RCM... all i really was ****** about... like everyone else was a lack of communication. i could have made plans around them but i had so fricking clue if they were going to show up the next day.
 

Blackdr16

93 SHO
Joined
Jul 15, 2009
Messages
188
Reaction score
50
Location
Washington, Illinois
Question....I have a 93 SHO MTX...3.2 swap,3.0 cams, few more mods... going to turbo the thing. I couldnt get the thread to open for the "how to turbo a SHO" post above. Where can i get this info at on this forum?
 

Forum statistics

Threads
107,088
Messages
1,181,318
Members
16,154
Latest member
dan.delargy

Members online

Back
Top