Blwn SHO
SLOSHO
Ive got most of the motor ready to pull out. Is there anyone that can help me pull it out the rest of the way..
Motor pull.
- Thread starter Blwn SHO
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1993MTXSHO
Its a Taurus...
make sure you have all the bolts to the tranny, is this atx or mtx, first time i did an atx it took me a day to figure out wtf it wouldn't come out. Then i got ****** and hit the trans case with a sludge and cracked it
It was blown so i didn't care.
It was blown so i didn't care.
dantheman68
Kinda Big deal
day?
_____
_____
Blwn SHO
SLOSHO
Today tomorrow.asap.. I just want it out and ready for the 3.2
dantheman68
Kinda Big deal
do you have everything you need?...
thursday, i'm free
thursday, i'm free
ilikepoultry
6th motor SHO
i could help thursday also, but i can't be there until around noon
Blwn SHO
SLOSHO
Well i got it out today. Is there anyway when the new one can help swap everything to the 3.2 and help install when it gets here. I will update when thats a go if ya want. Can have a cook out and drink some..
Heres a retard move i did today when pulling it.
The shaft that runs from the trans to the passanger wheels... The bracket that hold it to the motor midway.. Well i didnt take that off. So here iam lifting the motor. Broke that bracket and the shaft. Also the bolt that runs by the shift link, Bolts to the tranny.. Snapped that out of the tranny. Need to pull that no to... What a new year. LOL
Heres a retard move i did today when pulling it.
The shaft that runs from the trans to the passanger wheels... The bracket that hold it to the motor midway.. Well i didnt take that off. So here iam lifting the motor. Broke that bracket and the shaft. Also the bolt that runs by the shift link, Bolts to the tranny.. Snapped that out of the tranny. Need to pull that no to... What a new year. LOL
dantheman68
Kinda Big deal
so you didnt take the CV axle out when pulling the engine?
:laugh_ti:
:laugh_ti:
Blwn SHO
SLOSHO
Yeah yeah. Laugh it up.LOL!
Blwn SHO
SLOSHO
???? Its a 1992 3.2.. Do I need o change the wiring harness to the from my 1995. Or is it the same??
smokin joe
SHO Member
3.2's were only in the automatics 93-95 all 92's were 5spd do a search on the forum EVERYTHING has been covered 1000 times on the 3.2 swap
Last edited:
Blwn SHO
SLOSHO
Yeah.. I just found that out at the dealer.. It a 1993 motor. But is te harness the same
Blwn SHO
SLOSHO
That is what i was thinking. But i got that so i guess i will be good.
Blwn SHO
SLOSHO
Iam still thinking of setting a day to have a get together at my place to put the motor in and cook out.. Anyone interested???
Blwn SHO
SLOSHO
Anyone?
dantheman68
Kinda Big deal
I would wait a bit more than 2 minutes, but depending on when you plan this, I can be there, I've pulled a few motors, and done some work with wiring harnesses...
ilikepoultry
6th motor SHO
I can help too
just give me a heads-up when you want to do it
just give me a heads-up when you want to do it
Blwn SHO
SLOSHO
Motor will be at my dads shop loading dock monday or Tuesday.. Anytime after that (WED) we can do it. Fater the better. Just tell me what beer ya like and food. And we got a deal.
Similar threads
