Meth wiring question

[Corey Sig]

Where did everyone hook up their power source for their meth kits? I keep blowing fuses and need a good spot. Thanks.

 

[yo tony]

What fuse did u use?

 

[Corey Sig]

I figured it out actually. I was using a 5. But went to a 10 and it worked. Didnt blow.

 

[yo tony]

Cool

 

[SilverSH0]

I figured it out actually. I was using a 5. But went to a 10 and it worked. Didnt blow.

So you changed the stock fuse from a 5 amp to 10 amp? That's not a good way to do an install. Now your stock electrical system is no longer protected with the proper fuse (5 amp) and has the potential to fry things. There is a device called an add-a-fuse that will allow you to maintain the stock 5 amp fuse and add a separate fuse properly sized for whatever wire you're adding. Changing a 5A fuse to a 10A fuse isn't the best way to do things.

But if you're saying you changed from wiring to a stock 5A circuit and wired to a stock 10A circuit that's different. Simply trying to make sure you didn't simply change the fuse sizes (I've seen that done a lot).

 

[yo tony]

I tried the add a fuse and it didn't work so i wired it into the fuse and it works great