Mass Breakfast meet July?

[TheKrazyRaven]

anyone north of boston wanna meet up somewhere?

me and kevin are gonna meet in methuen and go all the way down 93 through boston(pending tunnel trouble) to 95

and if the tunnel is messed up we'll jump on 95 at exit 37 instead

 

[Ace]

try getting a hold of SHO power..i think he's on the north shore and prob wouldnt mind riding down with you guys...

 

[Justin101]

ill be seein u guys on sunday too cant wait, ill be able to make breatkfast but not the BBQ sry, FRDSHOGRL93X3 if u could please bring those taillights for me! THX

 

[Racer X]

FedEx fell through. ****.

Anyone have one that spins at least? And isn't ejecting bearing material as it spins?

*edit*
Sorry if this violates any rules, if it does, mods can move it or whatever. Thanks.

 

[Mels]

*** has a white one isn't he coming?
SHOwhite's under Johns care as we speak, replaced the timing belt, H20 pump, regapped cps, valve cover gaskets/seals, o2 sensors, new breaklines, abs sensor, etc....
I hope showhite pulls through. You know how these cars are, it may never start again :cry: .
Mels do want the door panels before the meet? or just bring them w/me?

If you don't mind bringing them with you, that would be a big help. I wouldn't be able to get down to your place before Sunday. Which route are you taking? If 84 perhaps we could meet here at my place instead of the commuter lot, and just leave them here. LMK

 

[slickn56]

FedEx fell through. ****.

Anyone have one that spins at least? And isn't ejecting bearing material as it spins?

*edit*
Sorry if this violates any rules, if it does, mods can move it or whatever. Thanks.

I have a spare one if you need it, if you are gonna be hitting up the breakfast. LMK

 

[Ace]

FedEx fell through. ****.

Anyone have one that spins at least? And isn't ejecting bearing material as it spins?

*edit*
Sorry if this violates any rules, if it does, mods can move it or whatever. Thanks.

Hamal if thats all that is wrong with it and the pulley itself is ok go to the parts store and buy a bearing....tap the old one out(it should come out from the back of the pulley)use a socket that will fit...once the old bearing is out(make sure the race is out to,you should just see the pulley surface)line the new bearing up from the back of the pulley(youll see it will only go in one way)and using the socket(or equivelent)and tap the new bearing into place...you will know its in when it cant go in anymore and make sure it goes straight in...it should only take you about 10 to 15 minutes to do it i personally have done quite a few and is a much cheaper alternative than dealing with getting a new pulley...if you get stuck you can call me after 7 tommorrow night and i can walk you throught it....

 

[NA SHO kid]

finally got my red SHO running so i am in for the breakfast in the SHO and not the bike, thanks to Chris(SHO-ripper) for the alternator. hopefuly you all will like what has been done to it when you see it on sunday.
Eric

 

[SHOOFF13]

Well another now I have 3 shos coming with me with the addition of mysho1. I'm bringing the camera going to be taking some pics of the group cruise. I'll see you all sunday morning.

 

[Racer X]

Hamal if thats all that is wrong with it and the pulley itself is ok go to the parts store and buy a bearing...it should be a BCA 203FF...tap the old one out(it should come out from the back of the pulley)use a socket that will fit...once the old bearing is out(make sure the race is out to,you should just see the pulley surface)line the new bearing up from the back of the pulley(youll see it will only go in one way)and using the socket(or equivelent)and tap the new bearing into place...you will know its in when it cant go in anymore and make sure it goes straight in...it should only take you about 10 to 15 minutes to do it i personally have done quite a few and is a much cheaper alternative than dealing with getting a new pulley...if you get stuck you can call me after 7 tommorrow night and i can walk you throught it....

Wait, so there's a bearing that will fit? What parts store can I get this bearing at!?

 

[Ace]

yes Hamal there is..pm ill be o for a few...

 

[Jonny Cash]

Someone bring a videocamera!!!!!

I dont have one, and my digital only takes 10 second clips

 

[Ace]

Someone bring a videocamera!!!!!

I dont have one, and my digital only takes 10 second clips

i think that may be doable....

 

[TheKrazyRaven]

Well another now I have 3 shos coming with me with the addition of mysho1. I'm bringing the camera going to be taking some pics of the group cruise. I'll see you all sunday morning.

you guys wanna meet up w/ me and kevin somewhere along 93?

 

[MYSHO1]

Is SHO-ripper going?

 

[Ace]

Is SHO-ripper going?

i have run this by him..he said he'd like to but he's not sure if he can...

 

[S&MSHO]

*** has a white one isn't he coming?
SHOwhite's under Johns care as we speak, replaced the timing belt, H20 pump, regapped cps, valve cover gaskets/seals, o2 sensors, new breaklines, abs sensor, etc....
I hope showhite pulls through. You know how these cars are, it may never start again :cry: .
Mels do want the door panels before the meet? or just bring them w/me?

Looks like im Out, At the momment i have no Job and arnt able to get the $65 dollars it takes for the 2 day trip. ($40 Bux wurth of gas 7.50 to eat 5 for chris. plus supper when im down there saturday nite is $7ish) I wish i could.. Really sucks looks like there is going to be a great turn out to
Everyone have a great time ill try to make the next and i hope it has as great as turn out as this one

 

[FRDSHOGRL93X3]

Looks like im Out, At the momment i have no Job and arnt able to get the $65 dollars it takes for the 2 day trip. ($40 Bux wurth of gas 7.50 to eat 5 for chris. plus supper when im down there saturday nite is $7ish) I wish i could..

Suggestions:
1. Beg/Borrow/Steal
2. CoinStar a change jar
3. Hock/**** something of non-daily use
4. Buy a 1$ scratch ticket & pray (gotta have pretty good odds up there?)
5. Sell some parts at meet (then you only need 1/2 to get there)
6. Return something to the parts store
(if you own a SHO you have tons of crap you bought & never installed)

mels If you don't mind bringing them with you, that would be a big help. I wouldn't be able to get down to your place before Sunday. Which route are you taking? If 84 perhaps we could meet here at my place instead of the commuter lot, and just leave them here. LMK

Probably Rt34
Commuter Lots better for me. Call me Sat nite to verify exact plans.

 

[Mels]

Cool. I'll call your cell then?

 

[FRDSHOGRL93X3]

Cool. I'll call your cell then?